Pebeo Gedeo Siligum Molding Paste

Innovation at the service of your imagination!

With Gédéo Siligum Moulding Paste, you can create small custom molds and reproduce the most delicate patterns without losing any detail! Siligum paste is suitable for professional artists. Just one hundred grams of impression paste allows you to create up to three molds, four centimeters in diameter. The molding silicone produces unbreakable, flexible, self-de-molding, multi-cavity shapes. Molds made with this two-part silicone are easy to clean and can be reused several times. Once the blue resin and white hardener are mixed, your mold will set within five minutes from the time the impression is taken. This silicone molding paste gives you the ability to create molds that are compatible with many casting materials, including Gédéo Resins.

It is easy to reproduce all sorts of objects with Siligum Molding Paste and Gédéo Resins. Measure out 1-part blue component (resin) to one-part white component (hardener). Mix quickly (30 seconds) by rolling the mixture into a ball shape. The mixed dough should have a light blue uniform color. Press the object that you would like to cast into the paste on a flat level surface. Allow the Siligum Molding Paste to set for about 5 min at a temperature of about 73 degrees (23 °C). For additional application time, place the paste in the refrigerator for around one hour before making the mixture. Once the silicone has hardened, remove the object from the mold and pour the cast material (plaster, crystal resin, reconstituted stone) into the mold. You can reuse the impression as long as the silicone form remains usable.