Your Cart
Pebeo Gedeo Bio Based Glazing Resin 300ml
Save
20%
Off
list Price *
Our savings off of List Price (MSRP) are either due to a sale or super sale (indicated by a Red Price) or competitive matching to other online sellers and marketplaces. Prices, promotions, and availability may vary. For more information, view our Pricing Policy.
Size :
300 ml
- Hazardous Hazardous - This item is considered flammable or hazardous. These type of items are not available for rush or air service.
- LPP Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied.
-
Tech Notes:
Click This Icon To See Tech Notes
Pebeo Gedeo Bio-Based Glazing Resin 300ml
- Two-component epoxy resin system: 40% bio-based resin** and hardener
- Transparent, bright and solid
- Mixing: 1 part Glazing hardener (B) to 2 parts of Glazing resin (A).
- A colored brightener is added to optimize the resin's long-term transparency. Once set, the (pink) hue disappears.
- Casting thickness: up to 0.5 cm thick
- Setting time: Dry: 1.5 hours / Fully set: 6 hours
- Clean the tools with a dry cloth (brushes, splatters, spatulas) and 70% alcohol (commercially available) or alcohol gel.
- Maintenance: In their original packaging, fully sealed, and stored at between 15° C and 25° C.
- Keep away from freezing temperatures. The product will six months in the sealed bottle after opening.
**bio-based carbon represents on average 40% of the total carbon present in the resin
Directions for use:
- Make sure your work surface is horizontal and grab a timer.
- In a clean, dry container, first, pour one measurement of glazing hardener (B) with two doses of glazing resin (A). Trigger the stopwatch.
- Mix the two components well into the corners of the container (an incomplete mixing will not guarantee a cure while mixing too vigorously will create bubbles). Decant the mixture into a second container and mix again to ensure the optimal mix. Mixing time can take up to 5 minutes, depending on the amount prepared.
- The total time you spend mixing and waiting before casting must not be more than 10 minutes. Pour the whole prepared mixture on the medium of your choice.
- Leave to dry for 6 hours, away from dust. Adhesion is progressive and may vary depending on room temperature.
Item #
V33193
List
$57.25
Reg. Price
$45.68
Product Notes:
- Hazardous Hazardous - This item is considered flammable or hazardous. These type of items are not available for rush or air service.
- LPP Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied.
-
Tech Notes:
Click This Icon To See Tech Notes
Pebeo Gedeo Bio-Based Glazing Resin 300ml
- Two-component epoxy resin system: 40% bio-based resin** and hardener
- Transparent, bright and solid
- Mixing: 1 part Glazing hardener (B) to 2 parts of Glazing resin (A).
- A colored brightener is added to optimize the resin's long-term transparency. Once set, the (pink) hue disappears.
- Casting thickness: up to 0.5 cm thick
- Setting time: Dry: 1.5 hours / Fully set: 6 hours
- Clean the tools with a dry cloth (brushes, splatters, spatulas) and 70% alcohol (commercially available) or alcohol gel.
- Maintenance: In their original packaging, fully sealed, and stored at between 15° C and 25° C.
- Keep away from freezing temperatures. The product will six months in the sealed bottle after opening.
**bio-based carbon represents on average 40% of the total carbon present in the resin
Directions for use:
- Make sure your work surface is horizontal and grab a timer.
- In a clean, dry container, first, pour one measurement of glazing hardener (B) with two doses of glazing resin (A). Trigger the stopwatch.
- Mix the two components well into the corners of the container (an incomplete mixing will not guarantee a cure while mixing too vigorously will create bubbles). Decant the mixture into a second container and mix again to ensure the optimal mix. Mixing time can take up to 5 minutes, depending on the amount prepared.
- The total time you spend mixing and waiting before casting must not be more than 10 minutes. Pour the whole prepared mixture on the medium of your choice.
- Leave to dry for 6 hours, away from dust. Adhesion is progressive and may vary depending on room temperature.
Item # V33193 Overview
| Brand
® Pebeo >
Click to see all supplies & full collection for Brand: ® PEBEO
(this will take you away from this page)
Product Notes:
- Hazardous Hazardous - This item is considered flammable or hazardous. These type of items are not available for rush or air service.
- LPP Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied.
-
Tech Notes:
Click This Icon To See Tech Notes
Pebeo Gedeo Bio-Based Glazing Resin 300ml
- Two-component epoxy resin system: 40% bio-based resin** and hardener
- Transparent, bright and solid
- Mixing: 1 part Glazing hardener (B) to 2 parts of Glazing resin (A).
- A colored brightener is added to optimize the resin's long-term transparency. Once set, the (pink) hue disappears.
- Casting thickness: up to 0.5 cm thick
- Setting time: Dry: 1.5 hours / Fully set: 6 hours
- Clean the tools with a dry cloth (brushes, splatters, spatulas) and 70% alcohol (commercially available) or alcohol gel.
- Maintenance: In their original packaging, fully sealed, and stored at between 15° C and 25° C.
- Keep away from freezing temperatures. The product will six months in the sealed bottle after opening.
**bio-based carbon represents on average 40% of the total carbon present in the resin
Directions for use:
- Make sure your work surface is horizontal and grab a timer.
- In a clean, dry container, first, pour one measurement of glazing hardener (B) with two doses of glazing resin (A). Trigger the stopwatch.
- Mix the two components well into the corners of the container (an incomplete mixing will not guarantee a cure while mixing too vigorously will create bubbles). Decant the mixture into a second container and mix again to ensure the optimal mix. Mixing time can take up to 5 minutes, depending on the amount prepared.
- The total time you spend mixing and waiting before casting must not be more than 10 minutes. Pour the whole prepared mixture on the medium of your choice.
- Leave to dry for 6 hours, away from dust. Adhesion is progressive and may vary depending on room temperature.
Pebeo Gedeo Bio-Based Glazing Resin 300ml
- Two-component epoxy resin system: 40% bio-based resin** and hardener
- Transparent, bright and solid
- Mixing: 1 part Glazing hardener (B) to 2 parts of Glazing resin (A).
- A colored brightener is added to optimize the resin's long-term transparency. Once set, the (pink) hue disappears.
- Casting thickness: up to 0.5 cm thick
- Setting time: Dry: 1.5 hours / Fully set: 6 hours
- Clean the tools with a dry cloth (brushes, splatters, spatulas) and 70% alcohol (commercially available) or alcohol gel.
- Maintenance: In their original packaging, fully sealed, and stored at between 15° C and 25° C.
- Keep away from freezing temperatures. The product will six months in the sealed bottle after opening.
**bio-based carbon represents on average 40% of the total carbon present in the resin
- Make sure your work surface is horizontal and grab a timer.
- In a clean, dry container, first, pour one measurement of glazing hardener (B) with two doses of glazing resin (A). Trigger the stopwatch.
- Mix the two components well into the corners of the container (an incomplete mixing will not guarantee a cure while mixing too vigorously will create bubbles). Decant the mixture into a second container and mix again to ensure the optimal mix. Mixing time can take up to 5 minutes, depending on the amount prepared.
- The total time you spend mixing and waiting before casting must not be more than 10 minutes. Pour the whole prepared mixture on the medium of your choice.
- Leave to dry for 6 hours, away from dust. Adhesion is progressive and may vary depending on room temperature.
UPC | 3167860107076 |
---|
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field