Your Cart
SLI Search Template
Related Categories: 18x24 Canvas | Canvases 30x40 | Stretched Canvas 40x60" | 18x18 | 14x18 | 9x12 Panels | Extra Large Stretched Canvas | Box
-
Pro Lite Artist Stretcher Bar Single Bar 13"Save Up to77%Off list…Minimum purchase of 12 bars of assorted sizes Perfect For: * Stretching canvas at home * Easy to use * Professional Artists * Artists of all skill levels * Custom Canvas up to 50 × 50" Please note: A minimum purchase of 12 assorted bars is required. Special Bulk Pricing for Boxes of 25 or 50! Genuine Pine Wood Stretcher Bars, 3/4" Deep, 1.75" Wide Pro-Lite Bars measure 1-3/4" in width and are a genuine 3/4" deep, while most brand leaders are only 1-5/8" wide and 5/8" deep. This 1/8" difference creates a sturdier frame. Although some stretcher bars do not use consistent types of wood, (some are Pine, some are Poplar, and some could be Bass), Pro-Lite bars are always made of Pine, so you know you are getting consistent quality. The stretcher bars feature the traditional tongue and groove corner ends that you can quickly assemble by interlocking two strips to form a canvas corner. They also feature a uniform beaded edge, so the canvas is slightly offset, to ensure that there will be no "ghost" impressions on the canvas. For re-stretching a painting, the bead is on both sides; therefore, you can turn the frame around and staple into raw wood on the back if you ever need to re-stretch. Pro-Lite Artist Stretcher Bars are the perfect solution for custom sized canvases! Key Features: * Made From Genuine Pine Wood * 1-3/4" Wide and 3/4" Deep * Tongue and groove design * Beaded edge on both sides * Quickly assemble by interlocking two strips * Lightweight for shipping and storage * Minimum purchase of 12 bars of assorted sizes Perfect For: * Stretching canvas at home * Easy to use * Professional Artists * Artists of all skill levels * Custom Canvas up to 50 × 50" Please note: A minimum purchase of 12 assorted bars is required. Special Bulk Pricing for Boxes of 25 or 50! See More
-
Creative Mark Pro-Bar 1-1/2" Deep Heavy Duty Wood Stretcher Bars 54" (Box of 6)Save Up to73%Off list…The cross braces can be attached easily with flat head screws. Please note: A minimum purchase of 2 assorted boxes is required. Strips and Cross Braces may be assorted. Sold in boxes of 6. Key Features: * Genuine White Pine Wood, Kiln-Dried * 1.5” deep x 2” wide * Tongue… Extra Heavy Duty White Pine Wood Stretcher Bars! 1.5” deep x 2” wide Only about 15% of artists use heavy-duty stretcher bars when building their canvases, due to the prohibitive cost of quality constructed bars in their price range. With this in mind, Creative Mark set about to provide sturdy kiln-dried White Pine stretchers to artists so that they can build heavy-duty frames at substantial savings. Creative Mark Pro-Bar, Heavy Duty Wood Stretcher Bars, are sturdy with a depth of 1-1/2” x 2” wide, providing maximum durability with tongue and groove corners for easy assembly. Bars are finger-jointed for strength, creating straight stretcher bars with incredible durability and warp-resistance. Stretcher profiles have a deep front beaded edge, to prevent any ghosting of the stretcher on the canvas when working. On the back, the edges are gently rounded, making it easier to stretch and staple the canvas while also creating a clean paintable style canvas edge. Creative Mark Pro-Bar, Heavy Duty Wood Stretcher Bars, are made of sturdy White Pine with a depth of 1-1/2” x 2” wide, providing maximum durability Heavy Duty Pro Bar Stretchers go up to a massive 96 in length, perfect for the painter who works large scale. You can use Heavy Duty Pro-Bar Cross Braces to brace larger works. The cross braces can be attached easily with flat head screws. Please note: A minimum purchase of 2 assorted boxes is required. Strips and Cross Braces may be assorted. Sold in boxes of 6. Key Features: * Genuine White Pine Wood, Kiln-Dried * 1.5” deep x 2” wide * Tongue and groove design, tight fitting corners * Beaded lip prevents ghosting impressions * 1/2” depth edges * Lightweight for shipping and storage * Bars are finger-jointed for strength Perfect For: * Building heavy-duty frames at substantial savings * Artists who stretch canvas * Easy to use * Artists who paint large scale * Artists who demand quality * Gallery edge paintings that don’t require framing * Easier stretching with rounded back edges * See More
-
Creative Mark Heavy Duty Pro Cross Bars Box of 6 54"Save Up to79%Off list…head screws. Key Features: * Heavy-duty White Pine construction * Substantial savings * No notch in the center * Perfect For: * Artists who stretch canvases * Large scale canvases * Value-conscious artists who demand quality Please note: A minimum purchase of 2 assorted boxes is required. Extra Heavy Duty White Pine Wood Cross Braces! Only about 15% of artists use heavy-duty cross braces when building their canvases, due to the prohibitive cost of quality constructed bars in their price range. With this in mind, Creative Mark set about to provide sturdy kiln-dried White Pine crossbars to artists so that they can build heavy-duty frames at substantial savings. Creative Mark Pro-Bar Cross Braces are sturdy and provide maximum strength. These cross braces are not cut like regular braces; they have no notch in the center, meaning they retain their integrity and are far less prone to snapping in the middle. You can easily fit Heavy Duty Wood Pro-Bar Cross Braces into the back of your frame with flat head screws. Key Features: * Heavy-duty White Pine construction * Substantial savings * No notch in the center * Perfect For: * Artists who stretch canvases * Large scale canvases * Value-conscious artists who demand quality Please note: A minimum purchase of 2 assorted boxes is required. See More
-
Gallery Pro Cross Brace Single Brace - No Notch 13"Save Up to73%Off list…available when purchasing a single sized Box of 20. In addition you will need eight (8) wedges to tighten the canvas for each frame. Four (4) wood screws will be needed to secure cross braces. For your convenience plastic wedges and wood screws are sold in boxes of 100 (See Gallery Pro Plastic… Cross Braces, Medium Duty! 1½" Deep By 1½" Wide Gallery Pro Medium Duty Cross Braces are available in three types: No-Notch, Type T and Type B. All types are 1½" × 1½" in profile. No-Notch - Cross Braces have NO dado-cut centers. All sizes of No-Notch can be used in brace applications that do not need to cross another brace. Intended for use on the short side of the stretcher bar frame. Available in sizes 8" to 23". Type T Cross Braces are notched on the Top side for use in T-Brace applications and are intended to be used along with a Type B Cross Brace. Available in sizes 24" to 72". Type B Cross Braces are notched on the Bottom side and are for use in T-Brace applications along with a Type T Cross Brace. Type B brace bars are also available in sizes 24" to 72". When preparing a T-Brace application, you must use one "Type T" brace bar and one "Type B" brace bar to line up their dado-cut centers. Extra savings is available when purchasing a single sized Box of 20. In addition you will need eight (8) wedges to tighten the canvas for each frame. Four (4) wood screws will be needed to secure cross braces. For your convenience plastic wedges and wood screws are sold in boxes of 100 (See Gallery Pro Plastic Wedges and Wood Screws link below). Key Features:* 1½" × 1½" profile bar* Tongue and groove design* Three types of Cross Braces available* Available in sizes up to 72" Perfect For:* Professional Artists* Custom stretching at home* Easy to use * Canvas up to 72" See More
-
Acurit Light & Easy 9X12 LED Light Pad + Transparent Cut Mat ComboSave Up to62%Off listLighten your load and take your light pad on the go! Forget those dinosaur lightboxes and light pads of the past that were clunky, heavy, and not easy (or impossible) to transport. The Acurit LED Light Pad is strong, lightweight, compact, portable, and simple to use! It is perfect for tracing… Lighten your load and take your light pad on the go! Forget those dinosaur lightboxes and light pads of the past that were clunky, heavy, and not easy (or impossible) to transport. The Acurit LED Light Pad is strong, lightweight, compact, portable, and simple to use! It is perfect for tracing drawings, perspective drawings, hand lettering, graphic and textile design, tattoo design, and a host of machine shop and craft uses. Our Acurit LED Light Pad has been designed to be as portable as your other gear and may be moved from room to room in your home. It weighs in at just 1.5 lbs and is slightly less than 1/4" thick, but don't let it fool you - it packs a big punch! The outer dimensions are 9.84" x 13.3" (250x338mm) x 0.24" (6mm) depth, with a viewing area of 8.75" x 12.04" (222x307mm). The outer corners are rounded for safety and ease of handling, and it features standard English inch rules on both top and left-hand sides. A fantastic three levels of brightness gives you a whopping 15% more visibility over similar pads! The easy on/off button makes operation a breeze. The Acurit LED Light Pad uses just 5V of electricity to deploy brilliant LEDs that will last about 100,000 hours! The integrated sections of the pad are perfectly machined with a durable construction built to last. The LED unit casts even, non-flickering light across the entire surface and features an included USB cable to operate. The top and bottom edges of the lighted area are magnetized, allowing you to easily secure your paper with the two included red magnets or any other magnet you may have. The Acurit LED Light Pad comes with a complimentary 1-year warranty. Lighten your load and take your light pad on the go with Acurit Light Pad. You'll be glad you did! Brilliant LEDs, three levels of brightness, 15% more than visibility over similar pads, English inch rule & two included magnets to secure your paper. Available in one portable size LED Light Pad lighted area: 8.75" x 12.04" (222x307mm) Overall size 9.84" x 13.3" (250x338mm) Key Features: * Durable, lightweight, compact, portable & built to last * Secure your paper with the two included red magnets * Light pad weighs 1.5 lbs * Outer dimensions are 9.84" x 13.3" (250x338mm) * Depth (6mm) slightly less than 1/4" thick * Viewing area of 8.75" x 12.04" (222x307mm) * Rounded outer corners for safety * English inch rules on both top and left-hand sides * Three levels of brightness * Easy on/off button * 5 Volts of electricity * Brilliant LEDs will last about 100,000 hours! * 15% more than visibility over similar pads * USB C to USB A cable included * Non-flickering light across the entire surface * Top and bottom edges of the lighted area are magnetized to secure paper * 4 Non-Slip rubber feet (on bottom) * Complimentary 1-year warranty * Perfect For: * Tracing drawings and hand lettering * Graphic and textile design, tattoo design * Tattoo design and machine shop * Craft uses * Artists of all ages and skill levels! * Tracing and transferring artwork or photographs * Using anywhere a power outlet is available * Artists on the go! * Students, classrooms, and studios * Using at an adjusted drawing angle LED Light Pad + Upsyde Angle Lyfts Combo - The Acurit Light LED Light Pad is available individually or as a practical kit with Upsyde Angle Lifts, which provide an ergonomically comfortable work angle. Additionally, we feature a combo Light Pad kit with a 9x12" transparent cutting mat or a handy three-piece combo with all three! See More
-
Gallery Pro Medium Duty Stretcher Bar-54" (Box of 20)Save Up to66%Off listFlush frame and rigid support that is sturdy! 1-1/2" Deep by 1-1/2" Wide These all wood, kiln-dried solid pine stretcher bars combine rigid support at an economical price! The stretcher bars feature the traditional tongue and groove corner ends that you can quickly assemble by interlocking two… Flush frame and rigid support that is sturdy! 1-1/2" Deep by 1-1/2" Wide These all wood, kiln-dried solid pine stretcher bars combine rigid support at an economical price! The stretcher bars feature the traditional tongue and groove corner ends that you can quickly assemble by interlocking two strips to form a canvas corner. They also feature a uniform beaded edge, so the canvas is slightly offset, to ensure that there will be no "ghost" impressions on the canvas. The profile measures 1-1/2" wide by 1-1/2" deep. Unlike other stretcher bar systems, these create an ideal flush frame that is sturdy. Gallery Pro Medium Duty Stretcher Bars are the perfect solution for custom sized canvases! Key Features: * 1½" × 1½" profile * Tongue and groove design * Kiln-dried solid pine * Quickly assemble by interlocking two strips * All wood solid pine stretcher Perfect For: * Stretching canvas at home * Easy to use * Professional Artists * Artists of all skill levels * Custom Canvas up to 72 × 72" See More
Powered by
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field