Williamsburg Lead Oil Ground

Prepare your surface before painting

Williamsburg Lead Oil Ground is a traditional oil ground made with Basic Lead Carbonate and marble dust for the perfect amount of tooth and absorbency. A small amount of Titanium White is added to improve opacity and brightness. Ground in 100% alkali-refined linseed oil. The perfect amount of tooth and absorbency. It contains no zinc or alkyd. A combination of pigment, marble dust and alkali refined linseed oil used to prepare a surface before painting. Dries to a semi-absorbent, satin finish. Some separation of the product can occur due to settling.

NOTE: Stir separated mixture to an even consistency before using

SANDING OIL GROUNDS: Do NOT sand Lead Oil Grounds once dry.The dust created from sanding lead products is harmful. Titanium Oil Grounds can be sanded if desired. Always use a respirator when sanding to avoid inhalation as airborne particulates can cause respiratory irritation.

DRYING TIME: Each coat will take approximately 2-3 days to dry. Be sure that each coat is dry before applying subsequent coats. After the last coat is touch drywe recommend waiting a minimum of two weeks before painting.

STORAGE: Any unused thinned ground can be saved for future use. Stir before using.

SUPPLIES NEEDED: Oil Ground, Solvent (odorless mineral spirits,mineral spirits or turpentine), Palette knife, Paint can opener or screwdriver, Brush (natural bristle), Rigid Support or properly sized canvas