Turner Acryl Gouache Mediums

Turner Acryl Gouache Glass Primer: Used as an undercoat on glass with excellent adhesion. Brush out directly or with about 10% water. Apply one or two coats as thinly as possible for the best finish. Dry thoroughly for more than one day before overpainting with Acryl Gouache.

Turner Acryl Gouache Wood Primer: Used as an undercoat on wood to create good covering power and adhesion with acrylic paint. Wood Primer will block stains and seal porous surfaces to prevent colors from excessive soaking into the wood. Dilute with about 30% water to make a smooth and beautiful finish. Dry thoroughly for more than one day before overpainting with Acryl Gouache.

Turner Acryl Gouache Metal Primer: Used as an undercoat on metal with good water and weather resistance. Brush out directly or with about 10% water. Apply one or two coats as thinly as possible for the best results. Dry thoroughly for more than one day before overpainting with Acryl Gouache.

Turner Acryl Gouache Modeling Paste Soft: Water-based paste in white color with high viscosity, which enables opaque and matte impasto. Modeling Paste (Soft) dries to an elastic film. Turner Modeling Paste is about 1/5 more lightweight than other modeling pastes. It makes color paler when an excessive amount is mixed with the color. Please note that it shrinks by approximately 30% after drying.

Turner Acryl Gouache Modeling Paste Pastel: Water-based paste in white color with high viscosity, which enables opaque and matte impasto. It gives an elastic film after drying, and pastel tone when mixed with acrylic paint. Please note that it shrinks by approximately 40% after drying. Impasto of about 3cm thickness will take about 3 to 6 days to dry at an ambient temperature of 20 C thoroughly.