Setacolor French Leather Paint Mediums
Starting At: $7.39
From Price $7.39
PREPARE - CREATE - PROTECT your creations without altering them
Pebeo's Setacolor Leather Auxiliary mediums are perfect for preparing, creating, and protecting leather designs. For best results, use the Setacolor primer-degreaser before painting for optimum adhesion. A 1:1 mixture of thinner and color should be created for airbrushing to obtain the optimal paint viscosity. Glue is an auxiliary for bonding pearls and beads to leather or polyester. Use Pebeo's matte satin or gloss varnish to protect the design and obtain the desired finish.
- Opaque water-based acrylic mediums
- Works with Setacolor Leather paints
- Degreaser cleaner
- Glue for attaching materials
- Protective leather varnish
- Has New Item(s)
New Item(s) available from this line. See NEW items below that just arrived or added to our online store (indicator: NEW in blue under product item #)
Click Tabs For More
- Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied.
PREPARE - CREATE - PROTECT leather creations!
Pebeo's Setacolor Leather Auxiliaries are perfect mediums for preparing, creating, and protecting leather designs. For best results, use the Setacolor primer-degreaser medium before painting for optimum adhesion. A 1:1 mixture of thinner and color should be created for airbrushing to obtain the optimal paint viscosity. Glue is an auxiliary for bonding pearls and beads to leather or polyester. Use Pebeo's matte satin or gloss varnish to protect the design and obtain the desired finish.
- Setacolor Auxiliaries
- Opaque water-based acrylic mediums
- Works with Setacolor Leather paints
- Degreaser cleaner
- Glue for attaching materials
- Protective leather varnish
- Customizing leather and imitation leather
- Repairing discolored leather
- Painting and airbrushing
- Creating a satin, glossy, or matt-satin finish
Setacolor Preparer-Degreaser*: This is an auxiliary product used to prepare and degrease the surface, remove the protective varnish that covers the leather, and degrease it for optimal paint adhesion. Use this degreaser before applying Setacolor Leather Paint. *This is a Hazardous product. Observe the precautions for use. Use only outdoors or in a well-ventilated area.
Setacolor Lightening-Thinner Medium: For airbrushing, you should create a 1:1 mixture (thinner and color) to obtain an optimal viscosity for a smoother airbrush. This technique is highly recommended for customizing sneakers. The result is uniform (if you master the airbrush technique) and leaves no trace of paint. This auxiliary also lets you dilute, liquefy, and lighten Setacolor Leather colors when applied with a brush or airbrush without altering their properties (resistance, shine, etc.), unlike diluting with water.
Setacolor Glue: Glue is an auxiliary for bonding cotton, leather, polyester, etc., with pearls, powders, or beads. You should only apply the glue to the necessary areas, and we recommend gluing directly without waiting for it to dry. It is crucial to remove any residues before the glue dries.
Setacolor Masking Fluid: Masking Fluid is a peelable drawing gum perfect for defining paint-free areas on leather. Apply in a thick layer. Drying time varies depending on the thickness of the coating, but it should take approximately 30 minutes (Use a hair dryer to speed up drying). The bluish color helps to identify the masked areas and darkens when drying. You can apply it directly to the surface and then paint over it once the gum is dry. Alternatively, you can draw with the gum over an already applied color and cover the masking gum with another color to have a colored masked area instead of coloring the bare surface. Once dry, peel or rub the gum off with your fingers within a maximum of 15 days after application. Apply a thin layer of color to the dry masking gum to obtain clean lines after peeling or rubbing off. You can clean the brush with soapy water.
Setacolor Matt-Satin and Gloss Varnishes: Protective varnishes must be applied to the work for optimal and long-lasting results. Available in 2 finishes: matt/satin or gloss. The varnish will help to seal the color perfectly, protecting your creation from rubbing, scratches, wear and tear, and water. They can be applied with a brush for an entirely uniform finish or with an airbrush without prior dilution for a shiny varnish and mixed 50:50 water and varnish for a matt-satin effect. The matt-satin varnish must be well mixed before use. It is recommended to wait 24 hours before varnishing. Tip: Mixing matt-satin and gloss varnishes can achieve the desired finish. Mix 3 parts gloss varnish to 1 part matt-satin varnish for a satin finish.
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field