Pebeo Colorex Watercolor Markers & Sets

Pebeo Colorex Watercolor Marker Essentials Set of 6 Colors

The set contains six refillable markers, one of each in Primary Yellow, Magenta, Cyan, Spring Green, Sepia, and Ivory Black.

• Watercolor Marker Essentials Set of 6 Colors
• Vivid, dye-based watercolor ink marker
• The set includes Primary Yellow, Magenta, Cyan, Spring Green, Sepia, and Ivory Black
• Dilute with water or use full-strength
• Quick refill system
• Easy, fast, and clean application
• Markers compatible with 56 Colorex colors
• Sensitive to ultraviolet rays
• Protect using a UV absorbent varnish

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Pebeo Colorex Watercolor Marker Essentials Set of 12 Colors

The set contains 12 refillable markers, one of each in Light Yellow, Orange, Turkish Red, Violet, Ultramarine Blue, Turquoise Blue, Spring Green, Pink Beige, Raw Sienna, Payne's Grey, Ivory Black, and Fluorescent Pink.

• Watercolor Marker Essentials Set of 12 Colors
• Vivid, dye-based watercolor ink marker
• Includes Light Yellow, Orange, Turkish Red, Violet, Ultramarine Blue, Turquoise Blue, Spring Green, Pink Beige, Raw Sienna, Payne's Grey, Ivory Black, and Fluorescent Pink
• Dilute with water or use full-strength
• Quick refill system
• Easy, fast, and clean application
• Markers compatible with 56 Colorex colors
• Sensitive to ultraviolet rays
• Protect using a UV absorbent varnish

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Pebeo Colorex Watercolor Marker Replacement Tips (Pack of 3) + Support Tool

Three replacement brush tips are included along with the help tool.

• Watercolor Marker Replacement Tips (Pack of 3) + Support Tool
• Quick refill system
• Markers compatible with 56 Colorex colors

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Pebeo Colorex Watercolor Marker, Empty Marker

The Empty Pebeo Colorex Watercolor Marker can be filled with Colorex Watercolor Ink. Please Note: The colors White, Rich Gold, Pale Gold, and Silver Metallic don't work with the marker. They have pigments that can clog the brush tip.

• Empty watercolor marke
• Holds up to 45 ml of color
• Quick refill system
• Easy, fast, and clean application
• Markers compatible with 56 Colorex colors

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Pebeo Colorex Watercolor Marker Pack of 6 (Empty)

The Empty Pebeo Colorex Watercolor Marker can be filled with Colorex Watercolor Ink. You can dilute the transparent dye-based ink with water or use it full-strength. Please Note: The colors White, Rich Gold, Pale Gold, and Silver Metallic don't work with the marker. They have pigments that can clog the brush tip.

• Empty watercolor marker
• Holds up to 45 ml of color
• Dilute colorex ink with water or use full-strength
• Quick refill system
• Markers compatible with 56 Colorex colors
• Sensitive to ultraviolet rays
• Protect using a UV absorbent varnish

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Pebeo Refillable Aquabrush

Pebeo Refillable Aquabrush 1mm Tip - Water tank brush. Ideal for watercolor and ink techniques. Medium-sized brush tip made from high-quality synthetic fiber. The flexible brush tip allows you to create varied lines. The Empty Aquabrush can be filled with Colorex Watercolor Ink. You can dilute the transparent dye-based ink with water or use it full-strength. As with all inks, Colorex Ink is sensitive to ultraviolet rays. Coat finished works with a UV varnish to protect against fading.

• Refillable Aquabrush
• 1 mm brush tip
• Dilute colorex ink with water or use full-strength
• Quick refill system
• Easy, fast, and clean application
• Markers compatible with 56 Colorex colors
• Sensitive to ultraviolet rays
• Protect using a UV absorbent varnish

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops

Filling Instructions:

1. Take a pipette of Colorex ink
2. Directly load the pipette into the marker through the black valve. Full load = 5 pipettes. If necessary, wipe off excess ink around the valve. Wait a few minutes for the ink to soak in.
3. The marker is ready to use
4. After use, clip the cap tightly to prevent the lead from drying out, and store the marker horizontally

Brush Tip Removal:

1. Remove the used tip with the pliers from the support tool
2. Place the new tip into the marker cavity
3. Push the tip into the marker until the tool stops