Lineco Klucel G

Lineco Klyucel G Hydroxypropyl Cellulose, 2oz

When mixed with alcohol Klucel G creates an adhesive bond without the deformation that water can cause. You can use Klucel G powder in either water or alcohol, but it is commonly used with alcohol, which evaporates at a quicker rate. Klucel G makes the best adhesive for paper hinges and reinforcement. To create the adhesive, combine Klucel G with ethanol or isopropyl alcohol (use roughly twice as much alcohol as powder) in a closed jar and shake vigorously. Once the alcohol has saturated the powder, it should turn from cloudy to clear in several hours or overnight, which will create a thicker version of the adhesive. A thicker form of Klucel G has a better bond because it develops a skin that will shrink as the alcohol evaporates, drawing the two surfaces together. Klucel G is also a leather consolidant that helps prevent the spread of red rot on leather.

Directions for hinging artwork: Mix Klucel G with either ethanol or isopropyl alcohol (use about twice as much alcohol as powder) in a closed jar and shake vigorously. Once the alcohol has infused the powder, it should turn from cloudy to clear in several hours or overnight. This creates a thicker version of the material and should bond more strongly. A more concentrated form of Klucel G is likely to bond better as it readily forms a skin, and that skin will shrink as the alcohol evaporates, drawing the two surfaces together.

Directions for leather consolidation: Mix Klucel G powder with ethanol or isopropyl alcohol (alcohol should be at room temperature). Use one teaspoon of Klucel G for every 4 ounces of liquid. Slowly sprinkle the Klucel G into the alcohol and stir or shake to mix. The mixture will appear clumpy and thick at first. Allow at least 24 hours for the powder to dissolve completely. Mix and store in a sealed container to prevent evaporation. Mix or shake the mixture again before application. Gently apply a thin, even coating to the deteriorating (red rot) leather. When dried, additional treatments may be required if leather still appears dry or powdery.

Directions for reinforcing paper: Mix Klucel G with either ethanol or isopropyl alcohol (use ½ teaspoon of Klucel G for every 4 ounces of alcohol. With a small paint or sponge brush, carefully apply a thin, even coating of the mixed gel to the paper and allow it to dry.

Lineco Klyucel G Hydroxypropyl Cellulose, 8oz

When mixed with alcohol Klucel G creates an adhesive bond without the deformation that water can cause. You can use Klucel G powder in either water or alcohol, but it is commonly used with alcohol, which evaporates at a quicker rate. Klucel G makes the best adhesive for paper hinges and reinforcement. To create the adhesive, combine Klucel G with ethanol or isopropyl alcohol (use roughly twice as much alcohol as powder) in a closed jar and shake vigorously. Once the alcohol has saturated the powder, it should turn from cloudy to clear in several hours or overnight, which will create a thicker version of the adhesive. A thicker form of Klucel G has a better bond because it develops a skin that will shrink as the alcohol evaporates, drawing the two surfaces together. Klucel G is also a leather consolidant that helps prevent the spread of red rot on leather.

Directions for hinging artwork: Mix Klucel G with either ethanol or isopropyl alcohol (use about twice as much alcohol as powder) in a closed jar and shake vigorously. Once the alcohol has infused the powder, it should turn from cloudy to clear in several hours or overnight. This creates a thicker version of the material and should bond more strongly. A more concentrated form of Klucel G is likely to bond better as it readily forms a skin, and that skin will shrink as the alcohol evaporates, drawing the two surfaces together.

Directions for leather consolidation: Mix Klucel G powder with ethanol or isopropyl alcohol (alcohol should be at room temperature). Use one teaspoon of Klucel G for every 4 ounces of liquid. Slowly sprinkle the Klucel G into the alcohol and stir or shake to mix. The mixture will appear clumpy and thick at first. Allow at least 24 hours for the powder to dissolve completely. Mix and store in a sealed container to prevent evaporation. Mix or shake the mixture again before application. Gently apply a thin, even coating to the deteriorating (red rot) leather. When dried, additional treatments may be required if leather still appears dry or powdery.

Directions for reinforcing paper: Mix Klucel G with either ethanol or isopropyl alcohol (use ½ teaspoon of Klucel G for every 4 ounces of alcohol. With a small paint or sponge brush, carefully apply a thin, even coating of the mixed gel to the paper and allow it to dry.