Head, Bust & Figure Armatures by Creative Mark

Creative Mark Armature 13in Head / Bust (1/2 Life-Size)

Our 13" Head/Bust armature is constructed of non-staining, non-corrosive aluminum wire making it the perfect support for sculpting your 1/2 life-size head. The armature has a stiff steel post and a base made of laminated particleboard. The head has a partial neck wrapped in additional wire so that you may include the collarbone.

Please note, you cannot put the armature in a kiln during firing. The clay will shrink, but the wire will not, resulting in cracking and breakage. You should remove the armature and hollow out the clay head before firing. You could also build your own wet, twisted newspaper armature as the paper will burn off during firing.

Creative Mark Armature 15in Head / Bust (5/8 Life-Size)

Our 15" Head/Bust armature is constructed of non-staining, non-corrosive aluminum wire making it the perfect support for sculpting your 5/8 life-size head. The armature has a stiff steel post and a base made of laminated particleboard. The head has a partial neck wrapped in additional wire so that you may include the collarbone.

Please note, you cannot put the armature in a kiln during firing. The clay will shrink, but the wire will not, resulting in cracking and breakage. You should remove the armature and hollow out the clay head before firing. You could also build your own wet, twisted newspaper armature as the paper will burn off during firing.

Creative Mark Armature 20in Head / Bust (Life-Size)

Our 20" Head/Bust armature is constructed of non-staining, non-corrosive aluminum wire making it the perfect support for sculpting your life-size head. The armature has a stiff steel post and a base made of laminated particleboard. The head has a partial neck wrapped in additional wire so that you may include the collarbone.

Please note, you cannot put the armature in a kiln during firing. The clay will shrink, but the wire will not, resulting in cracking and breakage. You should remove the armature and hollow out the clay head before firing. You could also build your own wet, twisted newspaper armature as the paper will burn off during firing.

Creative Mark Armature 12in Figure

Creative Mark armatures are malleable enough to provide true artistic freedom to create, while also providing a sturdy skeleton to hold the weight of modeling material. Each armature has a stiff steel post, and a base made of laminated particleboard. The aluminum wire is lightweight, pliable, non-staining, and non-corrosive.

Please note, you cannot put the armature in a kiln during firing. The clay will shrink, but the wire will not, resulting in cracking and breakage. We suggest using a wet and twisted newspaper armature as the paper will burn off during firing.

Creative Mark Armature 15in Figure

Creative Mark armatures are malleable enough to provide true artistic freedom to create, while also providing a sturdy skeleton to hold the weight of modeling material. Each armature has a stiff steel post, and a base made of laminated particleboard. The aluminum wire is lightweight, pliable, non-staining, and non-corrosive.

Please note, you cannot put the armature in a kiln during firing. The clay will shrink, but the wire will not, resulting in cracking and breakage. We suggest using a wet and twisted newspaper armature as the paper will burn off during firing.