Creative Inspirations Acrylic Mediums & Varnishes

It may be difficult to open the pump the first time. Before inserting in the acrylic paint, to easily open the pump, hold the area containing the spring, and turn in the direction indicated on the spout.

If clogged, you can dislodge the dried, flexible paint with a paper clip, tooth pick, or small piece of wire. The pump can also be cleaned out by soaking in soap and warm water then keep pressing the pump. If not effective, allow the pump to soak overnight. Finish by rinsing thoroughly.

Measurements:
When Open: 13-1/4" Long
When Closed: 12-3/8" Long
Tube measures: 8-13/16" Long

The pump will handle every viscosity of water-based paints. The heavy-duty non-dripping pump may be placed in a locked position for prolonged storage periods. Dispenses about an ounce of paint at a time. May be used on 1.8 liter or half-gallon jugs. Spout tips keep paint from drying out in the pump.

• Made of high-quality "spring loaded" components
• Dispenses about 1oz. of paint at a time
• Lockable pump (twist down to lock, prolonged storage)
• Silicone spout tip guard (prevents drying in tip)
• Can easily be cut to resize for smaller size bottles
• Dimension: When fully open: 12.75" L
• Dimension: When fully locked/closed: 11-7/8" L
• Dimension: Tube only: 8" L
• Pump for 1.8 liter or half-gallon jugs
• Perfect for any viscosity of water-based paint

Twist lock - twist down to easy lock the pump for longer storage use to prevent paint from drying out.

Spout tip guard - convenient, attached spout tip guard that clips into spout opening to prevent drying. Perfect to protect your paints in between sessions!