Your Cart
SLI Search Template
Related Categories: Speedball Printing | Kits | Screen Printing Kit | Art Stencils | Speed Screen | Spray Bottles | Gouche Sets | Karen Campbell
There were no results that contained all of the words in your query. These results contain some of the words.
-
Alumilite Acrylic Mixing Cups (Pack of 25) 10 ozSave Up to49%Off list…Envirotex have a kiln fired look Envirotex Lite Kits - Pour On High Gloss Finish * Gallon Kit 02128: (1/2 gallon resin, 1/2 gallon Hardener), Coverage: 32 square foot* 32oz Kit 0232: (16oz resin, 16oz Hardener), Coverage: 8 square foot* 8oz Kit 02008: (4oz resin, 4oz Hardener), Coverage: 2 square… Creates a one of a kind, crystal clear, super hard, lustrous finish Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating. Key Features:* EnviroTex Lite: 8oz Kit, 32oz Kit & Gallon Kit* Use over acrylics or thoroughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish* Hardens to a high-gloss finish, and cures completely in 36 hours* The solvent-free formula is 100% solids and has no unpleasant odors* Waterproof as well as heat- and alcohol-resistant* Use Envirotex to coat, wood, rock, Sculpey, jewelry and more* Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look* Use it to create a hard lustrous finish for table tops, plaques, clocks, figurines etc* Instructions are included* Kits include resin and catalyst Use over acrylics or throughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish. Use Envirotex to coat, wood, rock, Sculpey, jewelry and more. Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look Envirotex Lite Kits - Pour On High Gloss Finish * Gallon Kit 02128: (1/2 gallon resin, 1/2 gallon Hardener), Coverage: 32 square foot* 32oz Kit 0232: (16oz resin, 16oz Hardener), Coverage: 8 square foot* 8oz Kit 02008: (4oz resin, 4oz Hardener), Coverage: 2 square foot* Envirotex Lite is used as a table tops, bar tops, resin art, wood, rock, sculpey clay, acrylic pour, jewelry and more. Envirotex Lite® is alcohol and heat resistant. Envirotex Lite® creates a hard lustrous finish for table tops, plaques, clocks, figurines etc. A Gallon Kit consists of 1/2 gallon of Resin and 1/2 gallon of Hardener, making a total of one gallon. See More
-
Yasutomo Acid-Free Nori Paste 10oz JarSave Up to19%Off listPerfect paste for the perfect project! Japanese Nori Paste is a starch-based adhesive perfect for crafting. Nori Paste is a must-have for all paper projects, from bookbinding to scrapbooking, collage to archival storage. Thin Nori Paste with water to the right consistency for your project. It will… Perfect paste for the perfect project! Japanese Nori Paste is a starch-based adhesive perfect for crafting. Nori Paste is a must-have for all paper projects, from bookbinding to scrapbooking, collage to archival storage. Thin Nori Paste with water to the right consistency for your project. It will adhere to glass, metal, plastic, wood, paper, and fabric. Nori Paste will not wrinkle or soak through the paper or fabric and is safe to use with even the most delicate artist papers. Non-toxic Nori Paste is available in 1.84 oz mini jars, and 10 oz tubs. Key Features:* Acid-free* Dries clear and incredibly strong* Dries slowly, allowing for readjustments* Easy to wash off hands and clothes* Pleasant smell Perfect For:* Bunka embroidery* Woodblock printing* Using as a watercolor medium* Can be mixed with PVA glue See More
-
Spectrafix Degas Fixative 10oz Aerosol SpraySave Up to19%Off listSpectraFix Fixative Is The Natural Choice! Degas SpectraFix Non-toxic Fixative contains casein, water, and alcohol. The formula is an update on a recipe used by French Impressionist Edgar Degas. It seals and protects your artwork while leaving colors brilliant! Degas Fixative is perfect for… SpectraFix Fixative Is The Natural Choice! Degas SpectraFix Non-toxic Fixative contains casein, water, and alcohol. The formula is an update on a recipe used by French Impressionist Edgar Degas. It seals and protects your artwork while leaving colors brilliant! Degas Fixative is perfect for chemically sensitive people. You can spray it indoors and keep on working because the fixative does not release toxic fumes or odors. The spray dries to a hard, water-resistant, matte finish; and provides the traction you need to apply extra layers of dry media. There are no toxic fumes or odors You may spray the fixative on all papers (except LaCarte), primed and unprimed canvas, wood panels, unglazed ceramic, stone, leather, and glass. SpectraFix it the ideal fixative for soft pastel, Pan Pastel and oil pastel, colored pencil, graphite, charcoal, and chalk. You can even use the fixative to layer other media into Encaustic. Use it under Oil or Acrylic paints to stop underdrawings from smudging. Casein bonds forever with the covering layer of paint. Like egg tempera, artists have used casein for centuries to protect underpaintings. Easily refill one of our Aerosol Spray Bottles to spray a fine mist on your work! Please note: Not for use as a final topcoat over acrylic or oil paint. Key Features: * Seals and protects artwork * Rapid drying pastel fixative * Contains casein, water, and alcohol * Protects fragile dry media * Prevents underpainting from smudging * No toxic fumes * 100% Archival * Non-yellowing * It does not dull colors * You can paint over it Perfect For: * Spraying indoors * Working with deep layers * Soft pastel, pan pastel and oil pastel * Colored pencil, graphite, charcoal, and chalk * Protecting watercolor paintings * All pastel papers (except LaCarte) * Primed and unprimed canvas * Wood panels, unglazed ceramic, stone, leather, and glass * Classrooms Dries quickly to an invisible matte finish and allows deep layering as well as providing extra traction on thickly layered, slippery media such as color pencil or oil pastel. Combines well with almost all media, and dries to a hard, water-resistant finish. Should not be used as a final top coat over acrylic or oil paint. Use with Soft Pastel, Pan Pastel and Oil Pastel, Colored Pencil, Graphite, Charcoal, Chalk or in combination with Watercolor, Gouache, Casein, Ink or to layer other media into Encaustic. Perfect for crafts, it holds a wide variety of media without dulling their sheen or brilliance. Use under Oil or Acrylic paints to prevent underdrawings from smudging. Casein actually bonds permanently with the covering layer of oil paint, and similar to egg tempera, has been used for centuries for grisaille or colorful underpainting which can then be glazed with oil. Remember, it is not recommended as a final top coating for acrylic or oils See More
-
Posca Acrylic Paint Marker 0.7-1 mm X-Fine Tip Light OrangeSave Up to33%Off listOrange Water-Soluble, Non-Toxic, and Lightfast Acrylic Paint Markers POSCA markers contain highly pigmented water-based acrylic paints. The paint is highly opaque, quick-drying, lightfast, and non-toxic. POSCA Paint Markers are blendable when wet and can be diluted with water to create a gradient effect on almost any surface. Thanks to its fast-drying time, you can layer colors on top of each other. The pen has a valve mechanism that allows for a tight paint seal. Before each use, you can shake the ball inside the barrel to prime the marker. Thanks to its fast-drying time, you can layer dark colors over light colors or even bright colors over dark colors. The ball inside the barrel of the POSCA markers ensures that when shaken, the paint is evenly mixed. The valve mechanism provides a tight paint seal that prevents the paint from drying out. After use, you can rinse the pen tips under water. Permanent on porous surfaces and erasable on most smooth non-porous materials, your creations can be protected with a fixative varnish. Use POSCA Paint Markers on a variety of surfaces, including wood, fabrics, glass, ceramic, plastic, metals, stones, papers, cardboard, and canvas. Key Features: * Water-soluble Paint Markers * Non-toxic, alcohol-free, lightfast acrylic * Valve mechanism provides tight paint seal * Ball in barrel primes marker * The medium tip is reversible * Quick-drying matte opaque colors * Stable pigments * Permanent on porous surfaces * Erasable on most non-porous materials * Perfect For: * Multiple art projects * Blending and layering colors * Creating infinite gradations of color * Use on a variety of different surfaces * Indoor and outdoor use * Bright compositions * Drawing smooth, consistent lines * Wood, fabrics, glass, ceramic, plastic * Metals, stones, papers, cardboard, and canvas Glass, Plastic, and Metal: Clean the surface with a cloth and ensure it is dry before starting work. Make artwork permanent by applying two coats of water-based spray varnish. Hold the can about 30 cm from the surface and spray in slow circular movements. The varnish can be matte or gloss depending on the look you want. (Not suitable for food use) Fabric: Machine-wash the fabric you plan to draw on to remove any industrial coatings or dirt. To prepare natural or artificial leather, wipe with a damp sponge and leave to dry. Once your creation is finished and dry, you can iron it from the reverse side without using steam. Set the temperature of the iron to the material setting for the fabric you are ironing. You can place a sheet of tracing paper between the iron and the fabric for extra protection. If the fabric used is not suitable for ironing, you can fix your creation with a hairdryer. Hold it 30 cm from the surface and make small circular movements. Ceramic: With treated ceramics, fix your creation for non-food use using a water-based spray varnish, spraying from about 30 cm in small circular movements. With rough ceramics, fire your creation in the oven. Heat the ceramic in the oven slowly to 220°, then turn off the oven and allow it to cool completely before taking it out. Fix the paint on porcelain in the same way, but to a temperature of 160° and for no more than 45 minutes. To give your creation the longest possible life (for non-food use), you can apply a water-based varnish or adhesive varnish. Afterward, you can only hand wash the ceramic in cold water. See More
Powered by
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field