Your Cart
SLI Search Template
Related Categories: 13x19 | 14x18 | 48x48 Stretched Canvas | Millbrook | 20x24 Glass | Stretched Canvas 40x60" | 11x14 Mat | Acrylic Glass
There were no results that contained all of the words in your query. These results contain some of the words.
-
Posca Acrylic Paint Marker 4.5-5.5 mm Broad Bullet Tip Light BlueSave Up to33%Off listBlue Water-Soluble, Non-Toxic, and Lightfast Acrylic Paint Markers POSCA markers contain highly pigmented water-based acrylic paints. The paint is highly opaque, quick-drying, lightfast, and non-toxic. POSCA Paint Markers are blendable when wet and can be diluted with water to create a gradient effect on almost any surface. Thanks to its fast-drying time, you can layer colors on top of each other. The pen has a valve mechanism that allows for a tight paint seal. Before each use, you can shake the ball inside the barrel to prime the marker. Thanks to its fast-drying time, you can layer dark colors over light colors or even bright colors over dark colors. The ball inside the barrel of the POSCA markers ensures that when shaken, the paint is evenly mixed. The valve mechanism provides a tight paint seal that prevents the paint from drying out. After use, you can rinse the pen tips under water. Permanent on porous surfaces and erasable on most smooth non-porous materials, your creations can be protected with a fixative varnish. Use POSCA Paint Markers on a variety of surfaces, including wood, fabrics, glass, ceramic, plastic, metals, stones, papers, cardboard, and canvas. Key Features: * Water-soluble Paint Markers * Non-toxic, alcohol-free, lightfast acrylic * Valve mechanism provides tight paint seal * Ball in barrel primes marker * The medium tip is reversible * Quick-drying matte opaque colors * Stable pigments * Permanent on porous surfaces * Erasable on most non-porous materials * Perfect For: * Multiple art projects * Blending and layering colors * Creating infinite gradations of color * Use on a variety of different surfaces * Indoor and outdoor use * Bright compositions * Drawing smooth, consistent lines * Wood, fabrics, glass, ceramic, plastic * Metals, stones, papers, cardboard, and canvas Glass, Plastic, and Metal: Clean the surface with a cloth and ensure it is dry before starting work. Make artwork permanent by applying two coats of water-based spray varnish. Hold the can about 30 cm from the surface and spray in slow circular movements. The varnish can be matte or gloss depending on the look you want. (Not suitable for food use) Fabric: Machine-wash the fabric you plan to draw on to remove any industrial coatings or dirt. To prepare natural or artificial leather, wipe with a damp sponge and leave to dry. Once your creation is finished and dry, you can iron it from the reverse side without using steam. Set the temperature of the iron to the material setting for the fabric you are ironing. You can place a sheet of tracing paper between the iron and the fabric for extra protection. If the fabric used is not suitable for ironing, you can fix your creation with a hairdryer. Hold it 30 cm from the surface and make small circular movements. Ceramic: With treated ceramics, fix your creation for non-food use using a water-based spray varnish, spraying from about 30 cm in small circular movements. With rough ceramics, fire your creation in the oven. Heat the ceramic in the oven slowly to 220°, then turn off the oven and allow it to cool completely before taking it out. Fix the paint on porcelain in the same way, but to a temperature of 160° and for no more than 45 minutes. To give your creation the longest possible life (for non-food use), you can apply a water-based varnish or adhesive varnish. Afterward, you can only hand wash the ceramic in cold water. See More
-
Fredrix Roll Canvas Watercolor Canvas 58" x 6 YardsSave Up to10%Off listWhite Revolutionary new watercolor surface! Fredrix Archival Watercolor Cotton Canvas is an innovative watercolor surface made of 100% cotton. It produces a unique look that can only be delivered by a canvas with superb lifting abilities for corrections and natural washes. This innovative cotton canvas combines the texture of woven fabric with a specially formulated acid-free gesso designed for all waterbased paints. You can scratch or scrape the versatile and robust canvas to create unique effects and rewet areas of dried watercolor without damaging the surface. Key Features: * 100% cotton canvas * Special acid-free gesso * Designed for all waterbased paints * Superb lifting abilities * Versatile and robust surface * Perfect For: * Watercolor & waterbased paints * Creating unique effects * Watercolor on stretched canvas * Artists of every level See More
-
Jacquard Cyanotype Potassium Ferricyanide, 1lb JarSave Up to15%Off listHarness the power of the sun to make detailed prints from virtually any object Cyanotype sun-printing process is one of the earliest photographic processes and is distinctive for its Prussian blue monochromatic prints. Famously, cyanotype was used by Ana Atkins and other field biologists for… Harness the power of the sun to make detailed prints from virtually any object Cyanotype sun-printing process is one of the earliest photographic processes and is distinctive for its Prussian blue monochromatic prints. Famously, cyanotype was used by Ana Atkins and other field biologists for indexing plant specimens with what were called photograms at the time. The Cyanotype process is incredibly simple and only employs two inexpensive chemicals and UV sunlight. Prints can be created on any natural fiber: paper, cotton, silk, wool, wood, etc. Jacquard has made Cyanotype printing easy as pie with pre-sensitized fabric that is ready for cyanotype printing. Simply pull the sheet out of the package, place objects or an inverted photographic negative on top, expose to light for three to fifteen minutes, submerge the fabric in water to reveal the blue cyanotype print, and finally hang the fabric to line dry. With Jacquard’s Cyanotype Pretreated Mural Fabric you can actually create a full-body print by laying on top of the mural fabric for the duration of exposure while not moving. The creative possibilities for Photographers, Mixed Media Artists, and Quilters are endless! If you would prefer to use your own papers or fabric Jacquard has made the chemistry of Cyanotype attainable with lightproof black bottles of Potassium Ferricyanide and Ferric Ammonium Citrate. The chemicals used for cyanotype are inexpensive and go a long way. Despite their perhaps alarming names, both are safe to handle and mix. That said, care should be taken to avoid ingestion, inhalation, and contact with skin. The instructions for the use of Potassium Ferricyanide and Ferric Ammonium Citrate are included in the link bellow Great for photographers, mixed media artists, printmakers, quilters, kids and more, the cyanotype process is easy, forgiving, quick, magical and fun. Capture the nuance of every shadow Key Features: * Harness the power of the sun to make detailed prints * Simply place the object on the sensitized surface and expose to sunlight (UV) * Sun exposure time is 3-15 minutes * Pre-sensitized Cyanotype fabric Perfect For: * Quilters and Surface Design Artists * Photographers * Mixed media artists, printmakers, quilters See More
-
Jacquard Dye Additive Urea 1 lb BagSave Up to10%Off list…Painting, stamping, or screen printing * Tie-dye, shibori, and ice dyeing * Low water immersion dyeing * Batik, printing, and direct painting * Direct painting or printing applications * Surface design Sodium Alginate SH: Sodium Alginate SH is a seaweed derivative used to thicken dyes for painting,… Essential chemicals for the dyeing process! Jacquard offers several necessary chemicals that complement their Acid and Procion MX dyes. Sodium Alginate SH is used to thicken dyes for painting, stamping, or screen printing. Citric Acid is a mild, odorless, powdered acid that helps fix acid dyes to protein-based fibers. Soda Ash promotes the chemical reaction between Procion MX fiber reactive dyes and cellulose fiber. The humectant Urea attracts moisture from the air and slows the tie-dye process, providing more time for the dye to process and generate deeper shades. You can use Synthrapol® an industrial-strength, pH-neutral liquid detergent as a wetting agent, or wash your decorated fabrics with it. It is essential to practice studio safety when using dyes and chemicals. Please keep dyes, paints, and chemicals away from children and avoid unnecessary skin contact. Key Features: * Powdered chemicals * Complement Acid and Procion MX dyes * Sodium Alginate SH will thicken dyes * Citric Acid is used to fix acid dye * Soda Ash is used to fix Procion MX dye * Urea enhances Procion MX colors * pH-neutral detergent and wetting agent Perfect For: * Fabric dyeing * Painting, stamping, or screen printing * Tie-dye, shibori, and ice dyeing * Low water immersion dyeing * Batik, printing, and direct painting * Direct painting or printing applications * Surface design Sodium Alginate SH: Sodium Alginate SH is a seaweed derivative used to thicken dyes for painting, stamping, or screen printing. When working with thicker fabrics, use a thinner consistency of dye solution to guarantee dye penetration. Instructions: Mix 1 quart water with ¼ cup Urea. Then, add two teaspoons Sodium Alginate SH for hand painting or four teaspoons Sodium Alginate SH for screen printing. Slowly sprinkle Sodium Alginate SH over water/Urea mix. Stir constantly for 10 minutes, or mix in a blender until smooth. Let stand for 1 hour, then stir again. The solution may be stored in a refrigerator for a few months. Soda Ash: Soda Ash dye fixer is a mild alkali that promotes the chemical reaction between Procion MX fiber reactive dyes and cellulose fiber. It is also known as sodium carbonate, washing soda, or salt soda. Soda Ash is necessary to activate and set Procion MX dye. For tie-dye (pre-soak method): Use one cup per gallon of warm water. Soak fabric in the mixture for 20 minutes. Squeeze/wring out the excess solution by hand. Do not rinse out. For immersion dyeing: Use 1/4 to 1/3 cup per three gallons of water. Add to dye bath per instructions. Dyeing cellulose fibers in a washing machine: Use 2-3 cups per load. Dissolve in one-quart hot water. Slowly add to dye bath in washer per instructions. Synthrapol®: Synthrapol® is an industrial-strength, pH-neutral liquid detergent used as a pre and after wash for dyed or painted fabrics. Synthrapol® can also be used as a wetting agent for fabric dyes and paints. The unique liquid detergent keeps loose dye pigment suspended during washing which prevents back staining and helps remove excess color. Pre wash: Prewashing fabric with Synthrapol® to remove oils, waxes, starches, and sizings helps ensure an even dye job and reduces the risk of blotchy color. Directions: Add three tablespoons Synthrapol® per 8 lb washing load. For cotton and other cellulose fibers, add two tablespoons soda ash. Wash for at least 10 minutes using hot water, and then rinse thoroughly. After wash: After dyeing or painting, rinse the fabric in cold water and then wash for at least 10 minutes using three tablespoons Synthrapol® per 8 lb wash load. Use hot water for cotton, cool to warm water for silk and wool, and then rinse thoroughly in cold water. Wetting Agent: Adding Synthrapol® to a dye bath or fabric paint can increase color penetration. When dyeing wool and other hard-to-wet fibers, add 2 to 3 drops of Synthrapol® per 5 lb fabric. To increase fabric paint coverage on hard-to-wet textiles, add 1 to 2 drops Synthrapol® per 2 fl oz of fabric paint. Citric Acid: Citric Acid is a mild, odorless, powdered acid that helps fix acid dyes and exhaust dye baths. Add one tablespoon of Citric Acid to the dye bath per 1 lb of fabric. Do not pour directly onto cloth. If further exhaustion of dye bath is necessary, add a little bit more. Avoid contact with eyes. In case of eye contact, flush immediately with water for at least 15 minutes. Keep out of reach of children. Urea: Urea is a humectant that attracts moisture from the air and slows the drying process; therefore, it allows more time for the dye to react with the fiber and helps develop deeper shades. Most artists use Urea when applying dye solutions directly to fabric or hand painting. Urea can be used with Sodium Alginate thickener for screen printing, direct painting, or tie-dye. Add one tablespoon Urea per 8 fl oz of dye solution (¼ cup per one quart of dye solution). See More
-
Brusho Crystal Colour, Cobalt Blue, 15 gramsSave Up to11%Off listBlue Incredibly versatile, highly pigmented watercolour ink powder Totally intermixable, Brusho Crystal Colours can be used on paper, canvas, or even wood. Brusho Crystal Colours are a unique new watercolour ink that is transparent and highly pigmented. It is renowned for its versatility and can be used in many different ways. With a broad, vibrant color range, many fantastic effects can be made when mixing Brusho and other solvents like water or bleach. They can be sprinkled on a brush for painting, dissolved in water, sprinkled on wet paper, painted on papier-mâché, fabric and much more. They are completely non-toxic and non-harzardous, but can still stain unprotected skin. They have been manufactured in Sheffield, England for over 35 years. They are the versatile ink powder crystals to fuel your imagination! Key Features:* Highly Pigmented Water Colour Ink Powder* Versatile ink powder crystals* Can be mixed with water to make watercolour washes and designs* Versatile powder crystals can be used for numerous creative effects and enhancements* Wide range of 32 colours* Completely non-toxic and non-harzardous* Dissolves in water* Sprinkled on wet paper* Painted on papier-maché, fabric and more Perfect For:* Can be sprinkled on a brush for painting* Watercolour painting * Fabric effects for wall hangings, design work, stage backdrops* Stencils* Creating designs using wax, crayons or candles. Craft Spritzer Set — Ideal for card making and other crafts, this set includes six 15 gram pots Brusho Crystals (Sunburst Lemon, Orange, Alizarin Crimson, Violet, Turquoise, and Sea Green), plus a spritzer bottle for creating bursts of vibrant background color. Assorted Set of 8 — This basic introductory set contains Yellow Ochre, Rose Red, Lime Green, Olive Green, Moss Green, Sandstone, Terracotta, and Burnt Sienna in 15 g pots, plus an instructional leaflet. Assorted Set of 12 — This broader range of 12 colors includes Lemon, Yellow, Orange, Scarlet, Brilliant Red, Purple, Ultramarine, Leaf Green, Emerald Green, Turquoise, Dark Brown, and Black in 15 gram pots, along with an instructional leaflet. Assorted Set of 24 — This complete set of 24, 15 gram colors includes Lemon, Yellow, Gamboge, Orange, Vermilion, Scarlet, Brilliant Red, Ostwald Red, Crimson, Cobalt Blue, Ostwald Blue, Ultramarine, Prussian Blue, Turquoise, Leaf Green, Emerald Green, Sea Green, Violet, Purple, Light Brown, Dark Brown, Grey, Black, and White, plus an instructional leaflet. See More
-
R&F Handmade Paints - Encaustic Medium (Pellets), 1lb BagSave Up to20%Off list…encaustic paints. It is important to use Encaustic Medium with your paints, as using only beeswax will reduce stability and produce a bloom on the painting that is only removable with heat. Available in either block or pellet form. Increases transparency and extends encaustic paints. * Impasto… Fine handmade mediums for encaustic painting! The ancient art of encaustic painting is brought into the 21st century with this excellent collection of handmade encaustic grounds, mediums, and raw materials from R&F! Enhance your encaustic paintings or make your own mediums to your specifications with this selection of fantastic ingredients. * Encaustic Gesso - This water-based ground is a modern version of the traditional gesso mix of rabbit skin glue and chalk. Specially formulated for encaustic painting, with a lower proportion of acrylic binder to solids, making it a more absorbent and receptive surface for wax-based paints. A quick and easy brushable white gesso. Specially formulated white ground for encaustics. * Encaustic Medium - Perhaps the most essential encaustic supply, Encaustic Medium is a blend of beeswax and damar resin, and is used to increase transparency and extend encaustic paints. It is important to use Encaustic Medium with your paints, as using only beeswax will reduce stability and produce a bloom on the painting that is only removable with heat. Available in either block or pellet form. Increases transparency and extends encaustic paints. * Impasto Modeling Wax - This heavy body wax medium is made from a mix of microcrystalline wax and beeswax. It is excellent for thick structural application, casting, carving, layering, and modeling. As Impasto Wax has a higher melting point than Encaustic Medium, you can apply standard encaustics over it without easily blunting sculptural shapes. Use for thick encaustic paint application and sculptural styles. * Damar Resin Crystals - A hard, clear resin from deciduous trees, Damar Resin Crystals are used to create encaustic mediums and paints. When mixed with beeswax, damar resin creates an encaustic binder that is stronger and more durable than beeswax alone, and also serves to raise the melting point of the wax. Damar is also used to create traditional oil painting mediums and varnishes. * White Beeswax (Pellets) - This natural beeswax has been whitened by mechanical filtration, instead of standard chemical bleaching, which can lead to negative pigment reactions and break wax down. Use White Beeswax as an ingredient in creating encaustic mediums and paints, along with Damar Resin, or as an initial priming layer for paper or board. Note that beeswax used alone in encaustics (without damar) is not as stable and is apt to bloom (become foggy). Use with damar resin to create encaustic paints and mediums. * Soy Wax (Pellets) - Made from partially hydrogenated soybean oil, Soy Wax is an environmentally friendly choice for cleaning encaustic brushes and tools. Unlike paraffin wax, which is made from petroleum products, Soy Wax is non-toxic, biodegradable, and made from an easily renewable resource. Use melted Soy Wax to remove color from painting materials, then wash tools or brushes in soapy water. Eco-friendly cleaning wax. See More
-
R&F Handmade Paints - Encaustic Medium (Pellets), 1lb BagSave Up to20%Off listFine handmade mediums for encaustic painting! The ancient art of encaustic painting is brought into the 21st century with this excellent collection of handmade encaustic grounds, mediums, and raw materials from R&F! Enhance your encaustic paintings or make your own mediums to your specifications… Fine handmade mediums for encaustic painting! The ancient art of encaustic painting is brought into the 21st century with this excellent collection of handmade encaustic grounds, mediums, and raw materials from R&F! Enhance your encaustic paintings or make your own mediums to your specifications with this selection of fantastic ingredients. Encaustic Gesso - Specially formulated white ground for encaustics. Encaustic Gesso - Specially formulated white ground for encaustics. Encaustic Medium - Increases transparency and extends encaustic paints. Impasto Modeling Wax - Use for thick encaustic paint application and sculptural styles. Damar Resin Crystals - Ingredient in making encaustic paints and mediums. White Beeswax (Pellets) - Use with damar resin to create encaustic paints and mediums. Soy Wax (Pellets) - Eco-friendly cleaning wax. See More
Powered by
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field