Your Cart
SLI Search Template
Related Categories: Sculpture Supplies | Glaze | Ceramic Glaze | Modeling Clay | Art Resin | Ceramic | Model | Plaster
-
Alumilite Acrylic Mixing Cups (Pack of 25) 10 ozSave Up to49%Off list
Starting At: 10.99
Creates a one of a kind, crystal clear, super hard, lustrous finish Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. This durable, resilient material requires no… Creates a one of a kind, crystal clear, super hard, lustrous finish Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating. Key Features:* EnviroTex Lite: 8oz Kit, 32oz Kit & Gallon Kit* Use over acrylics or thoroughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish* Hardens to a high-gloss finish, and cures completely in 36 hours* The solvent-free formula is 100% solids and has no unpleasant odors* Waterproof as well as heat- and alcohol-resistant* Use Envirotex to coat, wood, rock, Sculpey, jewelry and more* Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look* Use it to create a hard lustrous finish for table tops, plaques, clocks, figurines etc* Instructions are included* Kits include resin and catalyst Use over acrylics or throughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish. Use Envirotex to coat, wood, rock, Sculpey, jewelry and more. Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look Envirotex Lite Kits - Pour On High Gloss Finish * Gallon Kit 02128: (1/2 gallon resin, 1/2 gallon Hardener), Coverage: 32 square foot* 32oz Kit 0232: (16oz resin, 16oz Hardener), Coverage: 8 square foot* 8oz Kit 02008: (4oz resin, 4oz Hardener), Coverage: 2 square foot* Envirotex Lite is used as a table tops, bar tops, resin art, wood, rock, sculpey clay, acrylic pour, jewelry and more. Envirotex Lite® is alcohol and heat resistant. Envirotex Lite® creates a hard lustrous finish for table tops, plaques, clocks, figurines etc. A Gallon Kit consists of 1/2 gallon of Resin and 1/2 gallon of Hardener, making a total of one gallon. See More -
Creative Mark Armature 20in Head / BustSave Up to36%Off list
Starting At: 28.48
Mounted armatures ready to support a sculpture! Armatures provide the internal foundation on which you can build a sculpture. The worst experience a sculptor can have is to create something amazing, only to have the project fail due to the absence of sturdy support. Creative Mark's fully adjustable… Mounted armatures ready to support a sculpture! Armatures provide the internal foundation on which you can build a sculpture. The worst experience a sculptor can have is to create something amazing, only to have the project fail due to the absence of sturdy support. Creative Mark's fully adjustable range of armatures come as a figure or a head-bust combo. Our armatures are malleable enough to provide true artistic freedom to create, while also providing a sturdy skeleton to hold the weight of modeling material. Each armature has a stiff steel post, and a base made of laminated particleboard. The aluminum wire is lightweight, pliable, non-staining, and non-corrosive. Each head has a partial neck and the space to build a unique bust. The base of the neck is wrapped in additional wire so that you may include the collarbone. Key Features: * Made of Aluminum * Pliable, non-staining, and non-corrosive wire * Laminated particleboard base * Stiff steel post * Each head has a partial neck * Neck base is wrapped in additional wire * Space to build a unique bust * Perfect For: * Sculpture applications * A base for moist clay or plastilina * Figurative sculpture * Lifesize bust portraits * Fine artists * Supporting polymer clay * Classroom and workshop environments Please note, you cannot put the armature in a kiln during firing. The clay will shrink, but the wire will not, resulting in cracking and breakage. You should remove the armature and hollow out the clay head before firing. We suggest using a wet and twisted newspaper armature as the paper will burn off during firing. See More
Powered by
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field