Your Cart
GOLDEN Crackle Paste Medium, 8oz Jar
Save
30%
Off
list
Size :
8 oz
Format :
Jar
- Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied. Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied.
-
Click This Icon To See Tech Notes
Crackle Paste is a water-based product formulated with styrene-acrylic copolymer emulsions, and may have a tendency to yellow.This product has white, low-density solids that replace traditional fillers. Its unique ratio of specific solids and binders allows for a "controlled failure" to occur and the result is its tendency to crack. It has a consistency similar to cake icing, easily manipulated by a palette knife. Peaks will maintain their height and appearance. It is a harder film than the GOLDEN Light Molding Paste, yet still retains an absorbent surface.Films dry to an opaque, matte finish to which subsequent layers of acrylic paint and mediums can be applied. Crackle Paste can be easily tinted with GOLDEN Heavy Body, Matte, High Load and Fluid Acrylic Paints.It is imperative to test all aspects when working with GOLDEN Crackle Paste. This is a highly variable product, and it should NOT be assumed that it will perform exactly the same each time the product is used. Review this information carefully and conduct testing before using this product on artwork or decorative finishes.Drying times greatly depend upon film thickness. Very thin films will dry to the touch in several hours but may not develop much cracking. Increasing film thickness will increase the tendency to crack and also the size of the cracks and platelets. Cracks can take several days to fully develop.Do not force dry Crackle Paste, nor try to slow the drying by adding Retarder or other additives, as both conditions may interfere with the products ability to crack. Product should be allowed to cure between 65ºF and 75ºF, and under 75% Relative Humidity.Crackle Paste cleans up with soap and water. Do not let products dry on tools. Keep tools wet while in use. Soak tools in soapy water to remove dried films.
Item #
65607
Save Instantly
$6.12
List
$20.39
Jerry's
$14.27
Save Instantly
$6.12
Product Notes:
- Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied. Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied.
-
Click This Icon To See Tech Notes
Crackle Paste is a water-based product formulated with styrene-acrylic copolymer emulsions, and may have a tendency to yellow.This product has white, low-density solids that replace traditional fillers. Its unique ratio of specific solids and binders allows for a "controlled failure" to occur and the result is its tendency to crack. It has a consistency similar to cake icing, easily manipulated by a palette knife. Peaks will maintain their height and appearance. It is a harder film than the GOLDEN Light Molding Paste, yet still retains an absorbent surface.Films dry to an opaque, matte finish to which subsequent layers of acrylic paint and mediums can be applied. Crackle Paste can be easily tinted with GOLDEN Heavy Body, Matte, High Load and Fluid Acrylic Paints.It is imperative to test all aspects when working with GOLDEN Crackle Paste. This is a highly variable product, and it should NOT be assumed that it will perform exactly the same each time the product is used. Review this information carefully and conduct testing before using this product on artwork or decorative finishes.Drying times greatly depend upon film thickness. Very thin films will dry to the touch in several hours but may not develop much cracking. Increasing film thickness will increase the tendency to crack and also the size of the cracks and platelets. Cracks can take several days to fully develop.Do not force dry Crackle Paste, nor try to slow the drying by adding Retarder or other additives, as both conditions may interfere with the products ability to crack. Product should be allowed to cure between 65ºF and 75ºF, and under 75% Relative Humidity.Crackle Paste cleans up with soap and water. Do not let products dry on tools. Keep tools wet while in use. Soak tools in soapy water to remove dried films.
Item # 65607 Overview
| Brand
® Golden Artist Colors >
Click to see all supplies & full collection for Brand: ® GOLDEN ARTIST COLORS
(this will take you away from this page)
Product Notes:
- Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied. Lowest Price - This item is already at the Best Lowest Price Possible and no further discounts or coupons can be applied.
-
Click This Icon To See Tech Notes
Crackle Paste is a water-based product formulated with styrene-acrylic copolymer emulsions, and may have a tendency to yellow.This product has white, low-density solids that replace traditional fillers. Its unique ratio of specific solids and binders allows for a "controlled failure" to occur and the result is its tendency to crack. It has a consistency similar to cake icing, easily manipulated by a palette knife. Peaks will maintain their height and appearance. It is a harder film than the GOLDEN Light Molding Paste, yet still retains an absorbent surface.Films dry to an opaque, matte finish to which subsequent layers of acrylic paint and mediums can be applied. Crackle Paste can be easily tinted with GOLDEN Heavy Body, Matte, High Load and Fluid Acrylic Paints.It is imperative to test all aspects when working with GOLDEN Crackle Paste. This is a highly variable product, and it should NOT be assumed that it will perform exactly the same each time the product is used. Review this information carefully and conduct testing before using this product on artwork or decorative finishes.Drying times greatly depend upon film thickness. Very thin films will dry to the touch in several hours but may not develop much cracking. Increasing film thickness will increase the tendency to crack and also the size of the cracks and platelets. Cracks can take several days to fully develop.Do not force dry Crackle Paste, nor try to slow the drying by adding Retarder or other additives, as both conditions may interfere with the products ability to crack. Product should be allowed to cure between 65ºF and 75ºF, and under 75% Relative Humidity.Crackle Paste cleans up with soap and water. Do not let products dry on tools. Keep tools wet while in use. Soak tools in soapy water to remove dried films.
Achieve A Variety Of Effects And Expressions.
Crackle Paste Medium, 8oz Jar by GOLDEN
Crackle Paste is thick and opaque, designed to develop fissure-like cracks as it cures. This product has white, low-density solids that replace traditional fillers. Its unique ratio of specific solids and binders allows for a "controlled failure" to occur and the result is its tendency to crack. It has a consistency similar to cake icing, easily manipulated by a palette knife. Peaks will maintain their height and appearance. It is a hard film that still retains an absorbent surface.
- Crackle Paste Medium
- 8 oz Jar
- Brand: GOLDEN
- White opaqu3e medium that cracks as it dries
- Easy clean up
- 100 percent acrylic polymer emulsions
- Flexibility and durability
- Drying times greatly depend upon film thickness
- Dries to an opaque, matte finish with an absorbent surface suitable for acrylic paints and mediums
| Series | Artist, Professional |
|---|---|
| Format | Jar |
| Type | Paste |
| Finish | Semi-Gloss |
| Size | 8 oz |
GOLDEN Crackle Paste 8 oz Jar
thick, opaque material that cracks as it dries
Dries to an opaque, matte finish
Real Materials, Better Values
save more everyday @ Jerry’s!
Free & Fast Shipping $59+*
Orders $35+ (Flat Rate: $2.95*)
Best Fine Art Supply Selection
art materials curated for artists!
Personalized & Expert Service
our experts are here to help you!
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field