Your Cart
SLI Search Template
Related Categories: Modeling Tools | Modeling Clay | Ceramic | Plaster | Ceramic Tools | Art Resin | Polymer Clay | Sculpture Supplies
-
MAS Envirotex Lite Epoxy Kit (4 oz Resin, 4 oz Hardener) 8 ozSave Up to49%Off list
Starting At: 10.99
Creates a one of a kind, crystal clear, super hard, lustrous finish Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. This durable, resilient material requires no… Creates a one of a kind, crystal clear, super hard, lustrous finish Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating. Key Features:* EnviroTex Lite: 8oz Kit, 32oz Kit & Gallon Kit* Use over acrylics or thoroughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish* Hardens to a high-gloss finish, and cures completely in 36 hours* The solvent-free formula is 100% solids and has no unpleasant odors* Waterproof as well as heat- and alcohol-resistant* Use Envirotex to coat, wood, rock, Sculpey, jewelry and more* Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look* Use it to create a hard lustrous finish for table tops, plaques, clocks, figurines etc* Instructions are included* Kits include resin and catalyst Use over acrylics or throughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish. Use Envirotex to coat, wood, rock, Sculpey, jewelry and more. Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look Envirotex Lite Kits - Pour On High Gloss Finish * Gallon Kit 02128: (1/2 gallon resin, 1/2 gallon Hardener), Coverage: 32 square foot* 32oz Kit 0232: (16oz resin, 16oz Hardener), Coverage: 8 square foot* 8oz Kit 02008: (4oz resin, 4oz Hardener), Coverage: 2 square foot* Envirotex Lite is used as a table tops, bar tops, resin art, wood, rock, sculpey clay, acrylic pour, jewelry and more. Envirotex Lite® is alcohol and heat resistant. Envirotex Lite® creates a hard lustrous finish for table tops, plaques, clocks, figurines etc. A Gallon Kit consists of 1/2 gallon of Resin and 1/2 gallon of Hardener, making a total of one gallon. See More -
MAS FastCast Urethane Casting Resin 8oz KitSave Up to28%Off list
Starting At: 17.59
…sanded, shaped and painted. Perfect for casting, quick prototyping, models, sculpture, taxidermy and more. Key Features: * Urethane Resin sets in 10 minutes * Opaque white cast once cured * Odorless Perfect For: * Casting, quick prototyping, models * Sculpture or taxidermy * Ideal for larger casts Urethane Casting Resin Sets in 10 Minutes! MAS FastCast Urethane Casting Resin is a two-part clear urethane casting resin, once set the resin turns white. The urethane is odorless and sets in ten minutes at seventy degrees Fahrenheit. Both components of the two part mixture can be colored or tinted with opaque pigments or transparent dyes. If you color the resin solution the casting will turn to a pastel shade of that same color. Pieces can be removed from molds within ten to fifteen minutes of the resin being poured. Once cured, the casting can be drilled, sanded, shaped and painted. Perfect for casting, quick prototyping, models, sculpture, taxidermy and more. Key Features: * Urethane Resin sets in 10 minutes * Opaque white cast once cured * Odorless Perfect For: * Casting, quick prototyping, models * Sculpture or taxidermy * Ideal for larger casts See More -
ArtResinâ„¢ Epoxy Resin Mini Kit 8 ozSave Up toOff list
Starting At: 15.00
Unparalleled non-yellowing protection! ArtResin™ is a self-leveling crystal clear epoxy resin that forms a beautiful, durable finish for any artwork. Formulated with unparalleled non-yellowing protection, ArtResin™ has a HALS (hindered amine light stabilizer) added for extremely… Unparalleled non-yellowing protection! ArtResin™ is a self-leveling crystal clear epoxy resin that forms a beautiful, durable finish for any artwork. Formulated with unparalleled non-yellowing protection, ArtResin™ has a HALS (hindered amine light stabilizer) added for extremely efficient long term yellowing protection. Designed specifically for creative projects, this crystal clear resin is easy to use. ArtResin™'s 1:1 mixing ratio is user-friendly with easy to understand directions. Simply combine equal parts Resin and Hardener, stir, then pour or spread over your project. The topcoat is self-leveling and fully cures in 72 hours. ArtResin™ has been designated by the American Society for Testing and Materials as non-toxic when used as directed. It is formulated using the highest quality materials and therefore produces no VOCs or fumes. It is a clean system, meaning there are no solvents or non-reactive diluents—everything in it reacts so nothing is free to become airborne and cause health issues. It is also non-flammable. For all these reasons, it is therefore classified as a non-hazardous material and is shippable by air. Furthermore, many curatives have a powerful odor, however ArtResin has only a low odor and is applicator friendly. Key Features:* ArtResin™ Mini KIt, Starter kit, Studio Kit & Accessory Kit* Fully cures in 72 hours* No VOCs or fumes (conforms to ASTM D4236)* Non-toxic (when used as directed)* Long term yellowing protection* Self-leveling* Durable crystal clear finish* Easy to understand directions Perfect For:* Enhancing and protecting your work* Acrylic, watercolor* Oil paint that has completely dried* Spraypaint, encaustic, ink* Oil pastel, sculpture, silicone molds,* Other found objects. ArtResin™ is considered non-toxic when used as directed, however, there are some common sense safety precautions that every user should follow: Wear gloves. Epoxy resin is very sticky in its liquid form, so gloves will protect the user from a mess, as well as skin irritation. Clean skin promptly with soap and water if it does come in contact with the product. If the product somehow comes in contact with your eyes, flush with water repeatedly and do not rub. Promptly seek medical attention. Work in a well-ventilated area. Wear a respirator if ventilation is poor. For detailed health information, please see the ArtResin SDS.ArtResin™ Epoxy Kits ArtResin™ Starter Kit - Enough epoxy resin for a few projects, the Starter Kit includes 16 oz bottles of Resin and Hardener and covers approximately 8 square feet. ArtResin™ Studio Kit - For artists working on larger or multiple works. This kit includes half-gallon jugs of Resin and Hardener and covers approximately 32 square feet. ArtResin™ Mini Kit - Give ArtResin™ a try with the Mini Kit. It includes 4 oz bottles of Resin and Hardener and covers approximately 2 square feet. Epoxy Resin Accessory Kit - This pack of epoxy resin accessories includes five pairs of nitrile gloves, one reusable stir stick, and five reusable spreaders. The jagged-edge spreaders help disperse resin evenly. Wipe them clean with paper towel and they're ready for next time. ResinTint Color Mixing Guide See More -
Van Aken Kato Liquid Polyclay 8oz Clear MediumSave Up to19%Off list
Starting At: 7.15
Clear Transparent Liquid polymer clay developed with an artist for artists! COLOR Liquid Polyclay is a heat-set poly medium with exceptional strength and flexibility. Available in Red, Orange, Yellow, Green, Blue, and Violet, as well as opaque White and Black, you can mix these standard colors to create custom colors. You can even mix in mica powders to create a metallic or pearlescent effect. COLOR Liquid Polyclay has excellent leveling qualities and flows smoothly, allowing it to be baked on sheets or poured into metal or glass molds. After curing, you can cut it with scissors into different shapes. A few examples of its uses include stain glass window clings, watercolor effects, faux stones, faux cloisonné, faux dichroic glass, coasters, mosaics, marbleizing, transfers, and so much more! Key Features: * Created in partnership with artist Donna Kato * Liquid Kato Polyclay * Heat-set poly medium * Exceptional strength and flexibility * Create custom colors * Mix in mica powders to create a metallic or pearlescent effect * Excellent leveling qualities * Made in Georgia, USA Perfect For: * Use with Kato Polyclay * Pouring into metal or glass molds * Creating stain glass window clings * Watercolor effects * Faux stones, faux cloisonné, faux dichroic glass * Making coasters, mosaics, and transfers * School projects * Teachers and students Please note, when mixing colors, use minimal agitation. Excessive stirring will create air bubbles. See More -
Van Aken Kato Liquid Polyclay 8oz Clear MediumSave Up to20%Off list
Starting At: 4.20
Clear Transparent Polymer clay mediums developed with an artist for artists! You can use Polypaste as an adhesive, create textured surfaces, or repair cracks in polymer clay pieces with the paste. After curing, adhesion is permanent. Polypaste can also be used as a softening agent if your clay is hard to condition. Repel Gel is a water-soluble, non-toxic medium that prevents Kato Polyclay from sticking to itself during the baking process. The water-soluble gel is easy to use and easy to clean-up. Clear Liquid Polyclay Medium is an innovative product that supports the creation of perfect photo transfers and finishes for Kato Polyclay pieces. You can also use the medium as an adhesive, grout, or glaze. Key Features: * Created in partnership with artist Donna Kato * Kato Polyclay mediums * Polypaste adhesion is permanent * Water-soluble, non-toxic Repel Gel * Repel gel prevents Polyclay from sticking to itself * Easy to use and easy to clean-up * Polypaste works as a softening agent * Made in Georgia, USA Perfect For: * Use with Kato Polyclay * Creating photo transfers * Use as adhesive, grout, or glaze (Liquid Polyclay) * Gilding by mixing Polypaste with mica powder * Creating textured surfaces or repairing cracks in polymer clay (Polypaste) * School projects * Model making * Teachers and students Kato Nublade: is a flexible six-inch blade constructed of high-quality stainless steel that resists rusting. Its robust and supple design allows you to make curved or straight cuts. Even after repeated bending, the stainless steel blade will return to its straight shape. Liquid Polyclay Medium: Clear Liquid Polyclay Medium is an innovative product that supports the creation of perfect photo transfers and finishes for Kato Polyclay pieces. You can also use the medium as an adhesive, grout, or glaze. Liquid Polyclays should be cured at 300F (150C) for 20 minutes for a matte finish. To create a glossier finish, bake for an additional 10 minutes at 350F (177C), or wave a heat gun over the project until the desired glossiness appears. Do not inhale fumes and never cure above 350F (177C) or allow Liquid Polyclay to come in contact with an open flame. Polypaste Polymer Glue: You can use Polypaste as an adhesive, create textured surfaces, or repair cracks in polymer clay pieces with the paste. Because of its thick viscosity, it will not run. It is also a polymer clay, making it unlike any other adhesive out there. These unique properties make this medium useful in more ways than one. Polypaste can be used to bond polymer clay and finished Liquid Polyclay elements in any combination. Polypaste is exceptionally malleable; this makes it great for creating textured surfaces and embossing. After curing, adhesion is permanent. Polypaste can also be used as a softening agent if your clay is hard to condition. Repel Gel: Repel Gel is a water-soluble, non-toxic medium that prevents Kato Polyclay from sticking to itself during the baking process. The water-soluble gel is easy to use and easy to clean-up. Use a paintbrush to apply a thin coat of Repel Gel to the areas of the Polyclay were you want to avoid adhesion during the curing process. Follow baking instructions and separate the clay where you applied the Repel Gel. You can rinse off any residue with cold water. See More
Powered by
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field