Your Cart
SLI Search Template
Related Categories: Glass Paint | Glass | Pebeo Paint | Ceramic Supplies | Matte Paint | Pebeo Cerne Relief | Black Light Paint | Tackle Box
There were no results that contained all of the words in your query. These results contain some of the words.
-
Badger Airbrush AccessoriesSave Up to27%Off list…with in-line moisture trap. Fast-Blastâ„¢ Jar Adapter - Exhibits a 30º angle configuration for proper alignment with Models 150, 155, 175, 200 and 360 airbrushes. Glass Jars with Covers - Glass jars fit 150, 155, 175, 200, 250, 350, and 360 Model air brushes. Available in 2 oz  and ¾ oz sizes. Braided Air Hoses - This durable rubber air hose has an attractive braided  fiber “housing." Swivel connection for air brush at one end and varying  air source connector fitting at opposite end. Available in 10 ft length and 10 ft length with in-line moisture trap. Fast-Blastâ„¢ Jar Adapter - Exhibits a 30º angle configuration for proper alignment with Models 150, 155, 175, 200 and 360 airbrushes. Glass Jars with Covers - Glass jars fit 150, 155, 175, 200, 250, 350, and 360 Model air brushes. Available in 2 oz  and ¾ oz sizes. See More
-
Envirotex Lite Acrylic Pour-On High Gloss Finish KitsSave Up to49%Off listCreates a one of a kind, crystal clear, super hard, lustrous finish Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. This durable, resilient material requires no… Creates a one of a kind, crystal clear, super hard, lustrous finish Envirotex Lite is a water clear reactive polymer compound that cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength and toughness in about 36 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for a deep attractive finish, however, two or more coats maybe applied one over the other by simply wiping the surface with a clean cloth and alcohol prior to re-coating. Key Features:* EnviroTex Lite: 8oz Kit, 32oz Kit & Gallon Kit* Use over acrylics or thoroughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish* Hardens to a high-gloss finish, and cures completely in 36 hours* The solvent-free formula is 100% solids and has no unpleasant odors* Waterproof as well as heat- and alcohol-resistant* Use Envirotex to coat, wood, rock, Sculpey, jewelry and more* Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look* Use it to create a hard lustrous finish for table tops, plaques, clocks, figurines etc* Instructions are included* Kits include resin and catalyst Use over acrylics or throughly dried oil paintings for a one of a kind, crystal clear, super hard, lustrous finish. Use Envirotex to coat, wood, rock, Sculpey, jewelry and more. Pottery or plaster pieces painted with any acrylic and finished with Envirotex have a kiln fired look Envirotex Lite Kits - Pour On High Gloss Finish * Gallon Kit 02128: (1/2 gallon resin, 1/2 gallon Hardener), Coverage: 32 square foot* 32oz Kit 0232: (16oz resin, 16oz Hardener), Coverage: 8 square foot* 8oz Kit 02008: (4oz resin, 4oz Hardener), Coverage: 2 square foot* Envirotex Lite is used as a table tops, bar tops, resin art, wood, rock, sculpey clay, acrylic pour, jewelry and more. Envirotex Lite® is alcohol and heat resistant. Envirotex Lite® creates a hard lustrous finish for table tops, plaques, clocks, figurines etc. A Gallon Kit consists of 1/2 gallon of Resin and 1/2 gallon of Hardener, making a total of one gallon. See More
-
Big Squeeze Tube SqueezerSave Up to13%Off listSaves time, paint & money Introducing the Big Squeeze, a revolutionary tube squeezer that helps you empty any tube with ease. Big Squeeze paint tube wringers are made in the USA and are built to last with a heavy duty all metal design which works on metal, flexible plastic and rigid plastic… Saves time, paint & money Introducing the Big Squeeze, a revolutionary tube squeezer that helps you empty any tube with ease. Big Squeeze paint tube wringers are made in the USA and are built to last with a heavy duty all metal design which works on metal, flexible plastic and rigid plastic tubes. Made from aluminum, zinc, and carbon steel, the tube wringer measures 7-1/4" × 4-3/8" × 1-1/2" overall. The ergonomic handle and easy to turn crank are an incredible asset for artists with osteoarthritis and rheumatoid arthritis. Most paint tubes fit in the jaws of the tube wringer which can fit tubes up to 3-3/8" inches wide. Dishwasher safe, the Big Squeeze tube wringer is easy to clean and is perfect for everyday studio use. The Big Squeeze® allows the user to push all the contents of the main tube body towards the nozzle. However, when the gears contact the cone of the tube, located behind the tube opening, the Big Squeeze® gears can't compress the cone on most tubes. You will need to use your fingers to squeeze the remaining product from the cone out of the tube. Key Features: * Heavy duty all metal design * Easy to use ergonomic grip handle * Dishwasher safe * Measures 7-1/4" × 4-3/8" × 1-1/2" overall * Weighs 13.3 ounces * Fits most tubes (up to 3-3/8" wide) * Made from aluminum, zinc, and carbon steel * Eliminates waste, benefiting you and the environment * Will not rust, can be washed with soap and water or placed in a dishwasher Perfect For: * Squeezing metal, flexible and rigid plastic tubes * Eliminating paint waste * Osteoarthritis and rheumatoid arthritis * Acrylic, oil paint, and watercolor tubes * Everyday studio use * Why the Big Squeeze Tube Squeezer? * Saves time & money * Eliminates waste, benefiting you and the environment * Durable all-metal design * No more pain & discomfort in your hands * Satisfaction guaranteed with lifetime warranty * Made in the USA See More
Powered by
Login and Registration Form
Customer Login
Already a customer ? Sign in now for the best experience!
* indicates a required field