Jacquard deColourant Printing Paste - 8 oz Bottle

Jacquard deColourant Printing Paste - 8 oz Bottle

Jacquard deColourant Printing Paste removes color from dyed cotton, linen, silk, and wool. Unlike bleach, deColourant removes dye without weakening your fabric.

You can apply the paste with a brush, a sponge, a stamp, or a silk-screen. If you don’t like your design, wash it out and start over. Nothing happens until you activate the deColourant paste with heat. Once the fabric is heat-set with a hot iron or heat gun, the design will be permanent.

Create Subtractive Designs on Cotton, Linen, Silk, and Wool

• deColourant formerly known as "Discharge Paste"
• Remove dye without causing bleach damage
• Works on dyed cotton, linen, silk, and wool
• Apply with a brush, sponge, stamp, or silk screen
• Heat activates deColourant process
• Customize fabric with your own designs

How to use deColourant

1. Apply with brush, stamp, sponge, stencil, or screen print.
2. Allow the paste to dry.
3. Iron on the highest setting suitable for the fabric. For extra color removal, iron with steam. Use a heat gun if the print is still damp.
4. Wash out remaining paste with Synthrapol or mild detergent to restore softness.

Good to know before you start

• Results vary: some dyes release color better than others, and the paste may not fully whiten your fabric.
• deColourant should always be tested on a small area first.
• The paste will not work on painted or pigmented surfaces.

Safety note: Use in a well-ventilated area. Avoid eye contact and prolonged skin contact. Do not apply by spraying.