Pebeo Gedeo Bio Based Glazing Resin 150ml

Pebeo Gedeo Bio-Based Glazing Resin 150ml

• Two-component epoxy resin system: 40% bio-based resin** and hardener
• Transparent, bright and solid
• Mixing: 1 part Glazing hardener (B) to 2 parts of Glazing resin (A).
• A colored brightener is added to optimize the resin's long-term transparency. Once set, the (pink) hue disappears.
• Casting thickness: up to 0.5 cm thick
• Setting time: Dry: 1.5 hours / Fully set: 6 hours
• Clean the tools with a dry cloth (brushes, splatters, spatulas) and 70% alcohol (commercially available) or alcohol gel.
• Maintenance: In their original packaging, fully sealed, and stored at between 15° C and 25° C.
• Keep away from freezing temperatures. The product will six months in the sealed bottle after opening.

 **bio-based carbon represents on average 40% of the total carbon present in the resin

Directions for use:

1. Make sure your work surface is horizontal and grab a timer.
2. In a clean, dry container, first, pour one measurement of glazing hardener (B) with two doses of glazing resin (A). Trigger the stopwatch.
3. Mix the two components well into the corners of the container (an incomplete mixing will not guarantee a cure while mixing too vigorously will create bubbles). Decant the mixture into a second container and mix again to ensure the optimal mix. Mixing time can take up to 5 minutes, depending on the amount prepared.
4. The total time you spend mixing and waiting before casting must not be more than 10 minutes. Pour the whole prepared mixture on the medium of your choice.
5. Leave to dry for 6 hours, away from dust. Adhesion is progressive and may vary depending on room temperature.