72117F – Style 2050B
Textured gold finish with pale grey glaze on reverse slant moulding with 5/16" rounded lip
· 1/2" rabbet depth allows for glass, one mat, paper artwork and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1" deep
Item: 72117F
72117F – Style 2050B
Textured gold finish with pale grey glaze on reverse slant moulding with 5/16" rounded lip
· 1/2" rabbet depth allows for glass, one mat, paper artwork and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1" deep
72119F – Style 2054B
Textured gold finish with sage green glaze on reverse slant moulding with 5/16" rounded lip
· 1/2" rabbet depth allows for glass, one mat, paper artwork and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1" deep
Item: 72119F
72119F – Style 2054B
Textured gold finish with sage green glaze on reverse slant moulding with 5/16" rounded lip
· 1/2" rabbet depth allows for glass, one mat, paper artwork and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1" deep
72143F – Style 220BK
Satin gold "bamboo" foil finish on square molding with black back panel
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1" wide by 1/2" deep
Item: 72143F
72143F – Style 220BK
Satin gold "bamboo" foil finish on square molding with black back panel
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1" wide by 1/2" deep
52648 – Style 6263
Mottled shiny gold finish with pale grey glaze on deep scoop moulding with 3/4" ridged and beaded lip and 1/2" rounded top edge
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1 1/4" deep
Item: 52648
52648 – Style 6263
Mottled shiny gold finish with pale grey glaze on deep scoop moulding with 3/4" ridged and beaded lip and 1/2" rounded top edge
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1 1/4" deep
52649 – Style 6264
Mottled shiny gold finish with pale grey glaze on shallow scoop moulding with 3/8" beaded lip and 5/8" carved floral top edge
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1 1/8" deep
Item: 52649
52649 – Style 6264
Mottled shiny gold finish with pale grey glaze on shallow scoop moulding with 3/8" beaded lip and 5/8" carved floral top edge
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1 1/8" deep
52621 – Style 6301
Deep bronze brushed finish with dark grey glaze on scoop moulding with 1/4" beaded lip and 3/8" carved floral top edge
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/4" wide by 7/8" deep
Item: 52621
52621 – Style 6301
Deep bronze brushed finish with dark grey glaze on scoop moulding with 1/4" beaded lip and 3/8" carved floral top edge
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/4" wide by 7/8" deep
06377F – Topeka – Style 6377
Brushed shiny gold finish on clamshell moulding
· 7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing
· 1/8" offset clips needed or 3/4" canvas fitting
· Moulding is 1 3/8" wide by 1 1/4" deep
Item: 06377F
06377F – Topeka – Style 6377
Brushed shiny gold finish on clamshell moulding
· 7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing
· 1/8" offset clips needed or 3/4" canvas fitting
· Moulding is 1 3/8" wide by 1 1/4" deep
06379F – Seattle – Style 6379
Brushed shiny gold finish on clamshell moulding
· 5/8" rabbet allows for glass, mat, artwork, 3/16" foam board backing
· 1/8" offset clips needed for canvas fitting
· Moulding is 1 1/2" wide by 1" deep
Item: 06379F
06379F – Seattle – Style 6379
Brushed shiny gold finish on clamshell moulding
· 5/8" rabbet allows for glass, mat, artwork, 3/16" foam board backing
· 1/8" offset clips needed for canvas fitting
· Moulding is 1 1/2" wide by 1" deep
52622 – Style 6810
Mottled shiny gold finish with light specks and pale grey glaze on deep reverse scoop moulding with 1/4" offset lip and 3/8" beaded back groove
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/2" wide by 1 1/8" deep
Item: 52622
52622 – Style 6810
Mottled shiny gold finish with light specks and pale grey glaze on deep reverse scoop moulding with 1/4" offset lip and 3/8" beaded back groove
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/2" wide by 1 1/8" deep
72209F – Style 793
Mottled shiny gold finish on shallow scoop moulding with 1/4" beaded lip and 1/4" rounded dark gold top edge
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/2" wide by 3/4" deep
Item: 72209F
72209F – Style 793
Mottled shiny gold finish on shallow scoop moulding with 1/4" beaded lip and 1/4" rounded dark gold top edge
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/2" wide by 3/4" deep
54495 – Style 8505
Light gold wash and pale grey glaze on oak finish scoop molding with beaded offset lip and 1/2" rounded top edge
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1 1/2" deep
Item: 54495
54495 – Style 8505
Light gold wash and pale grey glaze on oak finish scoop molding with beaded offset lip and 1/2" rounded top edge
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1 1/2" deep
72212F – Sydney – Style 9339
Mottled gold finish and light grey glaze on carved compo swan moulding with 3/8" raised lip and 1/2" graduated back groove
· 7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing
· 1/8" offset clips needed or 3/4" canvas fitting
· Moulding is 1 1/2" wide by 1 1/8" deep
Item: 72212F
72212F – Sydney – Style 9339
Mottled gold finish and light grey glaze on carved compo swan moulding with 3/8" raised lip and 1/2" graduated back groove
· 7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing
· 1/8" offset clips needed or 3/4" canvas fitting
· Moulding is 1 1/2" wide by 1 1/8" deep
72214F – Aspen – Style 9347
Brushed and speckled shiny gold finish with light grey glaze on reverse scoop moulding with graduated offset lip
· 1/4" rabbet allows for glass, paper artwork, and 1/8" backing board
· 1/2" offset clips needed for 3/4" canvas fitting
· Moulding is 1 3/8" wide by 7/8" deep
Item: 72214F
72214F – Aspen – Style 9347
Brushed and speckled shiny gold finish with light grey glaze on reverse scoop moulding with graduated offset lip
· 1/4" rabbet allows for glass, paper artwork, and 1/8" backing board
· 1/2" offset clips needed for 3/4" canvas fitting
· Moulding is 1 3/8" wide by 7/8" deep
72123F – Style G207B
Brushed white gold finish on reverse slope moulding with bevel
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 1 3/4" wide by 1" deep
Item: 72123F
72123F – Style G207B
Brushed white gold finish on reverse slope moulding with bevel
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 1 3/4" wide by 1" deep
72121F – Style G211B
Brushed gold finish and black rounded back panel on deep wedge moulding with 1/2" bevel
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 1 1/8" wide by 2" deep
Item: 72121F
72121F – Style G211B
Brushed gold finish and black rounded back panel on deep wedge moulding with 1/2" bevel
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 1 1/8" wide by 2" deep
72179F – Style G308B1
Mottled black glaze over shiny gold finish on deep reverse scoop moulding with 1" shiny gold front edge and lip
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 3 1/2" wide by 1 1/2" deep
Item: 72179F
72179F – Style G308B1
Mottled black glaze over shiny gold finish on deep reverse scoop moulding with 1" shiny gold front edge and lip
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 3 1/2" wide by 1 1/2" deep
72133F – Style G313B
Shiny gold finish with light grey glaze on grooved deep clamshell moulding
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 1 3/4" wide by 1 1/2" deep
Item: 72133F
72133F – Style G313B
Shiny gold finish with light grey glaze on grooved deep clamshell moulding
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 1 3/4" wide by 1 1/2" deep
72181F – Style G315B
Brushed shiny gold foil finish on square moulding with black back groove and panel
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 1 5/8" wide by 1 1/4" deep
Item: 72181F
72181F – Style G315B
Brushed shiny gold foil finish on square moulding with black back groove and panel
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 1 5/8" wide by 1 1/4" deep
72149F – Style G415A1
Dark brown glaze over gold finish on shallow scoop moulding with ripple-textured compo
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1" deep
Item: 72149F
72149F – Style G415A1
Dark brown glaze over gold finish on shallow scoop moulding with ripple-textured compo
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 2" wide by 1" deep
72155F – Style G505B1
Mottled gold foil finish on shallow scoop moulding with black back panel and pale sage-glazed 3/8" beaded lip
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 2 5/8" wide by 1 1/4" deep
Item: 72155F
72155F – Style G505B1
Mottled gold foil finish on shallow scoop moulding with black back panel and pale sage-glazed 3/8" beaded lip
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 2 5/8" wide by 1 1/4" deep
72152F – Style G5108B
Shiny gold finish with dark grey glaze on half round moulding with bamboo-textured compo
· 3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing
· Turn buttons are needed for flush fitting of 3/4" canvas
· Moulding is 1" wide by 1 3/8" deep
Item: 72152F
72152F – Style G5108B
Shiny gold finish with dark grey glaze on half round moulding with bamboo-textured compo
· 3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing
· Turn buttons are needed for flush fitting of 3/4" canvas
· Moulding is 1" wide by 1 3/8" deep
72153F – Style G514B2
Shiny gold finish with specks and pale grey glaze on reverse scoop moulding with deeply textured compo
· 7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing
· 1/8" offset clips needed or 3/4" canvas fitting
· Moulding is 2" wide by 1 1/4" deep
Item: 72153F
72153F – Style G514B2
Shiny gold finish with specks and pale grey glaze on reverse scoop moulding with deeply textured compo
· 7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing
· 1/8" offset clips needed or 3/4" canvas fitting
· Moulding is 2" wide by 1 1/4" deep
72166F – Style G612B
Shiny gold finish with dark brown glaze over reverse scoop moulding with deeply textured compo and deep front edge
· 3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing
· Turn buttons are needed for flush fitting of 3/4" canvas
· Moulding is 2 7/8" wide by 1 3/4" deep
Item: 72166F
72166F – Style G612B
Shiny gold finish with dark brown glaze over reverse scoop moulding with deeply textured compo and deep front edge
· 3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing
· Turn buttons are needed for flush fitting of 3/4" canvas
· Moulding is 2 7/8" wide by 1 3/4" deep
72162F – Style G614B1
Shiny gold finish with specks and pale grey glaze on reverse slant moulding with deep floral carved compo and raised rounded lip
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 3 1/8" wide by 1 3/8" deep
Item: 72162F
72162F – Style G614B1
Shiny gold finish with specks and pale grey glaze on reverse slant moulding with deep floral carved compo and raised rounded lip
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 3 1/8" wide by 1 3/8" deep
72191F – Style G702
Shiny gold finish with pale grey glaze on shallow reverse slope moulding with thick textured compo
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 2" wide by 1 1/2" deep
Item: 72191F
72191F – Style G702
Shiny gold finish with pale grey glaze on shallow reverse slope moulding with thick textured compo
· 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing
· 1/4" offset clips needed for 3/4" canvas fitting
· 1/2" offset clips needed for 1 1/2" canvas fitting
· Moulding is 2" wide by 1 1/2" deep
V00273F – Style H4247
Shiny brushed gold finish with specks on deep scoop molding with 3/16" flat crown
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 1" wide by 1" deep
Item: V00273F
V00273F – Style H4247
Shiny brushed gold finish with specks on deep scoop molding with 3/16" flat crown
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 1" wide by 1" deep
V00275F – Style H4257
Shiny brushed gold finish with specks on shallow wedge moulding with 1/2" bevel
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/4" wide by 1" deep
Item: V00275F
V00275F – Style H4257
Shiny brushed gold finish with specks on shallow wedge moulding with 1/2" bevel
· 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board
· 3/8" offset clips needed for 3/4" canvas fitting
· Moulding is 1 1/4" wide by 1" deep
V00267F – Style I527
Dull brushed gold finish with specks on shallow scoop moulding with 3/8" flat crown
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2 3/8" wide by 7/8" deep
Item: V00267F
V00267F – Style I527
Dull brushed gold finish with specks on shallow scoop moulding with 3/8" flat crown
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2 3/8" wide by 7/8" deep
V00265F – Style P6667
Mottled brown glaze over dull gold foil finish on scoop moulding with 1/2" beaded lip
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2 7/8" wide by 1" deep
Item: V00265F
V00265F – Style P6667
Mottled brown glaze over dull gold foil finish on scoop moulding with 1/2" beaded lip
· 1/2" rabbet depth allows for glass, one mat and 1/8" backing board
· 1/4" offset clips needed for 3/4" canvas fitting
· Moulding is 2 7/8" wide by 1" deep