Black Custom Wood Frames

Click to Magnify, Double Click to Zoom Style 003-237 Other Views - Click on Images to Change View 003-237 010-237 010-237 016-237 021-237 023-237 024-237 042-237 052-237 8412 / 8613 8446 BR4520 N2910 N4810 72150-1		Share Perfect for complementing any painting, sketch, graphic or photograph Purchasing a beautiful custom frame couldn't be easier! These exceptional imported frames are available in a wide variety of styles and finishes, perfect for complementing any painting, sketch, graphic or photograph. For All Frames Up To 20 x 24" For All Frames Over 20 x 24" 72193F Matte black finish on small box stem moulding Not recommended for frames larger than 11 × 14 Not recommended for canvas fitting 1/2" rabbet depth allows for glass, one mat, paper artwork and backing board   72194F - Augusta Matte black finish on a square style moulding with a 1/4" raised lip on the back edge 3/8" rabbet depth allows for glass, single mat, artwork, 1/8" foamboard backing 3/8" offsets needed for 3/4" canvas fitting 72196F - Kona Matte black finish on box stem moulding 1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foamboard backing 1/4" offset for 3/4" canvas fitting 1/2" offset for 1-1/2" canvas fitting   72197F - Phoenix Satin black finish on scoop style moulding with offset lip 1/2" rabbet depth allows for glass, one mat and 1/8" foamboard backing 1/4" offsets for canvas fitting   72198F - Lisbon Matte black finish on a flat moulding style 7/8" rabbet depth allows for glass, two mats, and 3/16" foamboard backing 1/8" offsets needed or 3/4" canvas fitting 3/4" offsets needed for 1-1/2" canvas fitting (shim needed)   Please select the width and height for the desired frame. Price is calculated automatically for you when you add it to the basket. You may also preview the cost by clicking the calculate button. Please note: Custom frames take 1-2 weeks for delivery.

72193F – Style 003-237

Satin black finish on small rounded box stem moulding

·          Not recommended for frames larger than 11 x 14

·          Not recommended for canvas fitting

·          1/2" rabbet depth allows for glass, one mat, paper artwork and 1/8" backing board

·          Moulding is 1/2" wide by 5/8" deep

Item: 72193F

72193F – Style 003-237

Satin black finish on small rounded box stem moulding

·          Not recommended for frames larger than 11 x 14

·          Not recommended for canvas fitting

·          1/2" rabbet depth allows for glass, one mat, paper artwork and 1/8" backing board

·          Moulding is 1/2" wide by 5/8" deep

72194F – Augusta – Style 010-237

Satin black finish on a square style moulding with a 1/4" raised back edge

·          3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board

·          3/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 1" wide by 5/8" deep

Item: 72194F

72194F – Augusta – Style 010-237

Satin black finish on a square style moulding with a 1/4" raised back edge

·          3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board

·          3/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 1" wide by 5/8" deep

72196F – Kona – Style 014-237

Satin black finish on box stem moulding

·          1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing

·          1/4" offset clips needed for 3/4" canvas fitting

·          1/2" offset clips needed for 1 1/2" canvas fitting

·          Moulding is 7/8" wide by 1 ¼" deep

Item: 72196F

72196F – Kona – Style 014-237

Satin black finish on box stem moulding

·          1" rabbet depth allows for glass, one or two mats, artwork, 3/16" foam board backing

·          1/4" offset clips needed for 3/4" canvas fitting

·          1/2" offset clips needed for 1 1/2" canvas fitting

·          Moulding is 7/8" wide by 1 ¼" deep

72197F – Phoenix – Style 016-237

Satin black finish on scoop style moulding with offset lip

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/4" wide by 7/8" deep

Item: 72197F

72197F – Phoenix – Style 016-237

Satin black finish on scoop style moulding with offset lip

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/4" wide by 7/8" deep

72198F – Lisbon – Style 021-237

Satin black finish on a square style moulding

·          7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing

·          1/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 1 1/2" wide by 1 1/8" deep

Item: 72198F

72198F – Lisbon – Style 021-237

Satin black finish on a square style moulding

·          7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing

·          1/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 1 1/2" wide by 1 1/8" deep

72199F – Lima – Style 023-237

Satin black finish on clamshell moulding with grooved offset lip

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 3/8" wide by 7/8" deep

Item: 72199F

72199F – Lima – Style 023-237

Satin black finish on clamshell moulding with grooved offset lip

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 3/8" wide by 7/8" deep

72200F – Reno – Style 024-237

Satin black finish on reverse slant  moulding with beveled offset lip and raised top edge

·          5/8" rabbet allows for glass, mat, artwork, 3/16" foam board backing

·          1/8" offset clips needed for canvas fitting

·          Moulding is 1 1/2" wide by 1" deep

Item: 72200F

72200F – Reno – Style 024-237

Satin black finish on reverse slant  moulding with beveled offset lip and raised top edge

·          5/8" rabbet allows for glass, mat, artwork, 3/16" foam board backing

·          1/8" offset clips needed for canvas fitting

·          Moulding is 1 1/2" wide by 1" deep

72201F – Wakefield – Style 042-237

Satin black finish on reverse slant moulding with square-beaded offset lip ad raised top edge

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 2" wide by 1 1/8" deep

Item: 72201F

72201F – Wakefield – Style 042-237

Satin black finish on reverse slant moulding with square-beaded offset lip ad raised top edge

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 2" wide by 1 1/8" deep

72202F – Vail – Style 052-237

Satin black finish on reverse slant moulding with 7/8" crown

·          7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing

·          1/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 2 1/4" wide by 1 1/4" deep

Item: 72202F

72202F – Vail – Style 052-237

Satin black finish on reverse slant moulding with 7/8" crown

·          7/8" rabbet depth allows for glass, one or two mats, and 3/16" foam board backing

·          1/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 2 1/4" wide by 1 1/4" deep

08412F – Atlanta – Style 8412

Satin black finish on reverse slant molding with 1/4" inner bevel

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 7/8" wide by 1 1/8" deep

Item: 08412F

08412F – Atlanta – Style 8412

Satin black finish on reverse slant molding with 1/4" inner bevel

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 7/8" wide by 1 1/8" deep

08446F – Bismarck – Style 8446

Satin Black finish on square style molding with slightly beveled lip

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/4" wide by 3/4" deep 

Item: 08446F

08446F – Bismarck – Style 8446

Satin Black finish on square style molding with slightly beveled lip

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/4" wide by 3/4" deep 

08613F – Columbia – Style 8613

Satin black finish on reverse slant molding with 5/16" inner bevel

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/2" wide by 7/8" deep

Item: 08613F

08613F – Columbia – Style 8613

Satin black finish on reverse slant molding with 5/16" inner bevel

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/2" wide by 7/8" deep

V00279F – Style BR4520

Satin black finish on scoop moulding with depressed back edge channel

·          3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board

·          3/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 2 1/8" wide by 1 1/8" deep

Item: V00279F

V00279F – Style BR4520

Satin black finish on scoop moulding with depressed back edge channel

·          3/8" rabbet depth allows for glass, single mat, artwork, 1/8" backing board

·          3/8" offset clips needed for 3/4" canvas fitting

·          Moulding is 2 1/8" wide by 1 1/8" deep

72151F – Style G509B

Satin black scoop moulding with gold raised top edge and gold graduated offset lip

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 3 3/4" wide by 2 3/4" deep

Item: 72151F

72151F – Style G509B

Satin black scoop moulding with gold raised top edge and gold graduated offset lip

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 3 3/4" wide by 2 3/4" deep

V00280F – Style N2910

Satin black finish on square molding with 3/8" raised top edge

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/2" wide by 3/4" deep

Item: V00280F

V00280F – Style N2910

Satin black finish on square molding with 3/8" raised top edge

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1 1/2" wide by 3/4" deep

V00281F – Style N4810

Satin black finish on deep scoop moulding with 1/4" flat crown

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1" wide by 1" deep

Item: V00281F

V00281F – Style N4810

Satin black finish on deep scoop moulding with 1/4" flat crown

·          1/2" rabbet depth allows for glass, one mat and 1/8" backing board

·          1/4" offset clips needed  for 3/4" canvas fitting

·          Moulding is 1" wide by 1" deep

72150F – Style S509A

Satin black scoop moulding with silver raised top edge and silver graduated offset lip

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 3 3/4" wide by 2 3/4" deep

Item: 72150F

72150F – Style S509A

Satin black scoop moulding with silver raised top edge and silver graduated offset lip

·          3/4" rabbet allows for glass, one or two mats, artwork, and 3/16" foam board backing

·          Turn buttons are needed for flush fitting of 3/4" canvas

·          Moulding is 3 3/4" wide by 2 3/4" deep